GIGA AMP Stallite SPKs.

myanmar · 8th March 2006, 11:56 AM

Hello Friends,

I already design very cheap & easy installation stallite spks.

My stallite spks are dipole design or ported or transmission line?
Because I am a starter.

Sound is more clear when above &below ports are block by clothes.

I didn't want to closed upper & lower.
Because I want to be very easy installation.

So, how can i tune my stallite spks.
Can I change distance between spk & ports above & below for tunning?
Can I block with sound absorber which is on the magnet & behind the spk?
Which is more clear sound?
I will test too.

Sorry for my poor english.
Pls, help me to more clear sound.
Pls, give me new idea.

myanmar · 8th March 2006, 12:15 PM

New picture

lndm · 10th March 2006, 09:50 AM

This is not a transmission line or a ported design. I think you probably should place some stuffing in the tube and close the top and bottom.

You could use filters to change the tone if you still need to.

myanmar · 3rd October 2006, 04:58 AM

new photo

myanmar · 3rd October 2006, 05:03 AM

another photo

myanmar · 3rd October 2006, 05:17 AM

new photo

myanmar · 3rd October 2006, 05:21 AM

another photo

myanmar · 3rd October 2006, 05:24 AM

new photo

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Giga Mosfet	Tyimo	Pass Labs	49	6th June 2009 06:10 AM
GIGA AMP TDA2030 single(or)bridge with tone control & mic	myanmar	Chip Amps	5	6th February 2007 06:28 AM
Giga Amp 5.1 Channel	myanmar	Chip Amps	26	1st November 2006 03:29 PM
Making tower spks. with peerless drivers	WhiteBoyChriss	Multi-Way	12	15th February 2003 02:26 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th March 2006, 09:50 AM	#3
lndm diyAudio Member Join Date: Mar 2006 Location: nsw	This is not a transmission line or a ported design. I think you probably should place some stuffing in the tube and close the top and bottom. You could use filters to change the tone if you still need to.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)