almost complete

rv1890 · 21st February 2006, 05:21 AM

it wouldnt let me add on to my previous post for some reason, so i made a new one. sorry. Here are the pics of my x-over so far. The components are mounted on a double sided copper clad board. I hope this doesnt present a problem. Anyways check it out and let me know what u think. thanks.

rv1890 · 21st February 2006, 05:22 AM

1

joe carrow · 21st February 2006, 05:28 AM

This may be a dumb question, but are all of the leads properly isolated from the copper? Or are you about to etch paths? It seems easier to create the traces before the components are loaded.

rv1890 · 21st February 2006, 05:32 AM

2

rv1890 · 21st February 2006, 05:43 AM

i still have a couple of resistors i need to find. thats for the empty spaces on the board. I hot glued in between the holes where the leads pass so that they dont touch the board. and adding rubber spacers between the posts. Something tells me that I shouldnt be using the copper board. is there anything im missing?

rv1890 · 21st February 2006, 06:08 PM

shall i continue with this design. im going to properly insulate the leads from the copper., but does nayone know if this presents a problem, or should i change the board?. thanks

Sparhawk · 21st February 2006, 06:28 PM

I wouldn't use the copper-clad board like that... it's just asking for trouble.

21st February 2006, 05:21 AM	#1
rv1890 diyAudio Member Join Date: May 2004 Location: U.S.	almost complete it wouldnt let me add on to my previous post for some reason, so i made a new one. sorry. Here are the pics of my x-over so far. The components are mounted on a double sided copper clad board. I hope this doesnt present a problem. Anyways check it out and let me know what u think. thanks.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help me complete my first gainclone.	psymo	Chip Amps	3	7th January 2007 11:00 AM
Yay!!!!!!my amp is complete and working!...but...--->	benmanf	Solid State	43	14th August 2004 10:39 AM
Amp or Pre-amp Complete kit	fcel	Solid State	2	19th September 2001 01:53 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st February 2006, 05:28 AM	#3
joe carrow diyAudio Member Join Date: May 2004 Location: San Francisco	This may be a dumb question, but are all of the leads properly isolated from the copper? Or are you about to etch paths? It seems easier to create the traces before the components are loaded.

21st February 2006, 05:43 AM	#5
rv1890 diyAudio Member Join Date: May 2004 Location: U.S.	i still have a couple of resistors i need to find. thats for the empty spaces on the board. I hot glued in between the holes where the leads pass so that they dont touch the board. and adding rubber spacers between the posts. Something tells me that I shouldnt be using the copper board. is there anything im missing?

21st February 2006, 06:08 PM	#6
rv1890 diyAudio Member Join Date: May 2004 Location: U.S.	shall i continue with this design. im going to properly insulate the leads from the copper., but does nayone know if this presents a problem, or should i change the board?. thanks

21st February 2006, 06:28 PM	#7
Sparhawk diyAudio Member Join Date: Sep 2002 Location: Ontario, Canada	I wouldn't use the copper-clad board like that... it's just asking for trouble.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)