If Speaker Workshop doesn't work???

Pbassred · 7th January 2006, 01:09 PM

A reasonable sound card (Maudio 2496) and a signal path that I can traceout from the card, though a mixer, through a channel strip and back into the card.

Speaker Workshop's calibration goes "phsst!" and hangs. I can't see any buttons to run it uncalibrated. I give up!

Is there any other software that will create a signal feed and compare a microphone (line) input?

kneadle · 8th January 2006, 04:02 AM

Just inquiring: did you download the unofficial speaker workshop manual?

Dave

Jezz-the-Fezz · 8th January 2006, 04:54 AM

I hardly dare open this can of worms but: http://www.audiogrid.com/audio/

You'll need to give it a minute to load up & maybe refresh besides, but he's got loads of this kind of stuff listed.

Pbassred · 8th January 2006, 09:13 AM

I tried to read the manual but I wasn't getting any answers about why it didn't make any white noise for me. However since all I wanted was to throw white noise through the speaker and measure the output to find holes................

The answer is: a 1998 copy of PAS Spectrum analyser pro.

Job done

7th January 2006, 01:09 PM	#1
Pbassred diyAudio Member Join Date: Nov 2003 Location: N London	If Speaker Workshop doesn't work??? A reasonable sound card (Maudio 2496) and a signal path that I can traceout from the card, though a mixer, through a channel strip and back into the card. Speaker Workshop's calibration goes "phsst!" and hangs. I can't see any buttons to run it uncalibrated. I give up! Is there any other software that will create a signal feed and compare a microphone (line) input? __________________ Jeeees! I only asked www.davethebass.com

8th January 2006, 04:02 AM	#2
kneadle diyAudio Member Join Date: Dec 2002 Location: Buffalo, NY	Just inquiring: did you download the unofficial speaker workshop manual? Dave __________________ I have a small website for my projects.

8th January 2006, 04:54 AM	#3
Jezz-the-Fezz diyAudio Member Join Date: Nov 2005 Location: Bolton, UK	I hardly dare open this can of worms but: http://www.audiogrid.com/audio/ You'll need to give it a minute to load up & maybe refresh besides, but he's got loads of this kind of stuff listed. __________________ Idlers ROCK!

8th January 2006, 09:13 AM	#4
Pbassred diyAudio Member Join Date: Nov 2003 Location: N London	I tried to read the manual but I wasn't getting any answers about why it didn't make any white noise for me. However since all I wanted was to throw white noise through the speaker and measure the output to find holes................ The answer is: a 1998 copy of PAS Spectrum analyser pro. Job done __________________ Jeeees! I only asked www.davethebass.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My scope doesn't work - need help!	Giaime	Equipment & Tools	17	23rd September 2011 06:47 AM
Speaker Works: SI T amp doesn't work with soundcard	bcherry	Multi-Way	2	27th February 2006 04:23 AM
LM2574 + FET =-> doesn't work	Danko	Power Supplies	2	7th July 2005 07:42 PM
adcom gfa 545 II doesn't work	Mattyo5	Solid State	1	14th February 2004 12:39 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read