Please check this xo for me

[kifeinthesink]

Hi,

I've got four audax HP100mo 4" woofers and 2 Audax TM020J5 tweeter on the way.

here are the links

hp100mo

audax tm020j5

Im trying to work out a starting point for the XO so I can order some parts. Could someone have a look at this and let me know if I've made any major errors.

A couple of points:

I bought these because they were very cheap on sale and I just want to mess around. I know there are drivers with better FR and these may be a bad combo, but Im just doing this as an exercise. If I like the end results thats a bonus. I dont have a measuring mic at the moment so Im just going to experiment and see what happens

I'll add an L-pad later. That, at least, I can get the parts for locally.

The XO below is for a two way and Ill add the second woofer at about 400 hz for baffle step.

I used an online XO calculator and checked against a second one.
Some people here have warned against using them but I dont know why. If any of this looks screwy please let me know.

    ----c1---------c2------------------
              l           l          l
              L1          L2         t
              l           l          l
    -------------------------------------

------------L3-----------L4-----------------
                  l              l         l
                  C3             C4        W
                  l              l         l
----------------------------------------------

C1 8.44 uf
L1 0.16 mh
C2 16.88 uf
L2 .72 mh
C3 16.89 uf
L3 0.72 mh
C4 3.75 uf
L4 .36

[kifeinthesink]

Sigh

Well the spacing in my very high tech XO diagram in the post above got reformatted. Its supposed to be a 4th order XO.