|
|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
|
|
Thread Tools | Search this Thread |
|
|
#11 |
|
diyAudio Member
Join Date: Sep 2004
Location: paris
|
hey keep it smooth guys
selenium and eminence are both brands that makes pretty high stuff, and also an entry level line that got many recommandations. Choose between the two you won't be disappointed, provided you use them right (= no bass, because xmax is VERY small) or go for the dayton with knowing you will need bigger amps and you have the risk not to be able to obtain desired spl. |
|
|
|
|
#12 |
|
diyAudio Member
Join Date: Jan 2005
Location: Rotterdam, NL
|
Personally I don't think there is much gain to be made when constructing low budget PA tops.
Some brands like Behringer, DAP (K112 serie) and JB (vibe series) offer tops of good quality for the money you pay for it. Some if not all tops costing less than the totall of components sold seperatly. These cabinets often offer relative high sensitivity (around 96 dB/W/m) and practical powerhandling between 300 and 600 Wrms. By adjusting the filters some improvements can be made. From 300$ and up diy tops become interesting again (imo) unless you are making them hornloaded (which can be rather difficult (even after years of experience). Wkr Johan |
|
|
|
|
#13 |
|
diyAudio Member
Join Date: Sep 2004
Location: paris
|
of course rademakers made a good point here, although the fun of diy is not to be underestimated
|
|
|
|
|
#14 |
|
diyAudio Member
Join Date: Jan 2006
Location: nowhere
|
I realize this is an old thread. I'm just adding for the SEARCH database.
This weekend I DJ'd a wedding and reception. About 6.5 hours. I have two sets of speakers that I used. One set on poles are the 10" Classics in a 2-way setup w/ a 4x10 horn. The floor towers are TMM configuration. Two 12" Classics per box, and each uses a Dayton silk tweeter. Each box got about 150-180 watts each. I had a 50hz highpass cap on the floor towers. The receiver has a subsonic filter as well. These speakers were PLENTY loud with headroom to spare. It was for a group of about 120 people, at least. I got alot of compliments on the sound and how it was distortion free at high volumes. Nice thing is that the Classics sounds just as good with dinner music as they did with dance music. So for me, the Dayton drivers were great with PA use. At least for a 100-130 people group. Considering I bought the drivers while on sale, I'm very pleased with the results. Since they are relatively cheap, replacing them when they fail wouldn't break the bank. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| B&G NEO8 PLANAR TRANSDUCER crossed to two Dayton classic 8"(DC200-8) | nunayafb | Planars & Exotics | 28 | 13th April 2009 08:28 AM |
| Dayton RS225, JBL Gold 12" Woofers | johnmark | Swap Meet | 1 | 11th December 2008 04:06 PM |
| MCM 55-1170 or Dayton classic 6.5"(295-305) ? | percy | Multi-Way | 2 | 21st July 2007 12:27 AM |
| FS: 15-inch Dayton Classic IIs | jmikes | Swap Meet | 0 | 12th March 2007 01:16 PM |
| Anyone interested in some Dayton 15" woofers at a good price? | Bill Fitzpatrick | Swap Meet | 31 | 15th March 2005 06:17 PM |
| New To Site? | Need Help? |
| Page generated in 0.08579 seconds (71.68% PHP - 28.32% MySQL) with 10 queries |