Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Morel 3-way tri-amped project
Morel 3-way tri-amped project
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 12th December 2005, 04:20 PM   #1
Joe-Al is offline Joe-Al
diyAudio Member
 
Joe-Al's Avatar
 
Join Date: Oct 2003
Location: here
Cool Morel 3-way tri-amped project

Hi All

I need some help planning cabinets for my new project.

I'll use a simple pc + rme pst to run BruteFIR as a digital filter, it's all ready, fully functional and tested.
I'll use an old stereo ONKYO receiver as the amp for the woofers and two t-amps for mid and tweeter.

I plan two boxes for each speaker, one for woofer and one for tweeter/mid.

Chapter 1, Planning the Woofer:

The woofer is a 10" morel drive, mw1075 - (http://morelusa.com/woofers/mw-1075.htm)

For the woofer I'll build a sealed box, in an infinite baffle fashion.

Working material is 2x17mm fly wood (red fly wood), the inner walls padded with damping material.
H: 108 cm (42.5")
W: 40 cm (15.75")
D: 25.4 cm (10")

Are these measurements good?
Where should I place the woofer? middle? upper middle close to the other box with the mid/tweeter?

My only limitation is the size of the wood planned for the job, it's 2 plates, around 120x240cm (4x8 feet)

Preferred shape is rectangle (off course), I'll probably trim the edges in a 45 degree angle to soften the edges. Is it better to round them? 45 degrees are much easier technically…

Thanks for your help.
  Reply With Quote

Reply


Morel 3-way tri-amped projectHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Morel CAW 938 vs. Peerless Exclusive 8'' for MDM 55 and OW I Project leifislive Multi-Way 17 3rd March 2009 06:07 AM
My TL/Bi-Amped Powered Speaker Project Nedrex Multi-Way 14 18th February 2009 01:08 AM
new morel MTM project: rantings wintermute Multi-Way 22 30th January 2005 11:13 AM
Where to place the amps in bi-amped/tri-amped Xicarius Everything Else 1 4th August 2004 12:13 PM
Help with Morel sub project andrew Multi-Way 5 11th May 2002 02:29 AM


New To Site? Need Help?

All times are GMT. The time now is 09:46 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki