Hypex UCD-180 Monoblocks

[audioferret]

I am now planning a Dual-Mono Amplifier Design using the Hypex UCD-180AD Digital Class D amplifier from DIYCable.com

Power Supply
Power Cord Volex Shielded 3-Connect (Mouser)
Input IEC Shurter 15A Power Entry/Switch (Mouser)
Filter Schurter 20A Filter Block (Mouser)
Toroid Avel 330VA 30-30 (PartsExpress)
Filter Caps 2X: FilmFoil PolyPro 100nF, 400V (PercyAudio)
Rectifier 2X: Fairchild 27A, 600V IXYS Bridge (PercyAudio)
Power Caps 4X: Nichicon 10KuF, 50V Superthru (PercyAudio)

Amplifier Unit
Filter Caps 2X 100nF 400V (PercyAudio)
2X 100uF 100V Nichicon KZ (PercyAudio)
RC Filter 2X 680nF 400V (PercyAudio)
2X Caddock 1R, 20W (PercyAudio)
Amplifer Hypex UCD-180AD (DIYCable)
Heat Sink DIYCable Aluminum Heat Sink (DIYCable)

Each Amp has an outboard power supply and the filtering capability is primarily in the second unit, next to the Amp Boards. Each power supply will have dual recification rails.

I used the guidelines on TNT-Audio to develop the Monoblocks and used the examples on DecibelDungeon for inspiration on Design. Does anyone have experience using the Hypex amps in this manner?

[audioferret]

Can someone move this to Solid State Amplifiers? I thought I was posting there...