What tweeter to use to match the C-Quenze?

trusound · 23rd November 2005, 01:05 AM

Well, I'm asking this question to the experts of been there done that...

And I know this should be in the car audio section, but I think my situation is a little different...

I am completly remaking my dash to accommodate an Aura NS18-992-4A that will free air into the motor compartment and fire towards the listener..My kick panels will extend from the floor to were the top of the dash used to be and free air into the fender wells.. I'm doing a three way and I already have my midrange and mid bass drivers. For midrange I have a set of Audio Technologies 15cm and for midbass I have the Audio Technologies 18cm. I am going a full active setup with fully adjustable xovers and eq...

I am needing a tweeter that works well off axis and one that will match these drivers..

thanks for anybody who can help

David Gatti · 23rd November 2005, 01:39 AM

Most Cquenze users, including myself, are using the Morel Supreme 110, with very nice results.

trusound · 23rd November 2005, 01:28 PM

thanks for the reply!!!!

I have a set of morel supremo's that have been collecting dust for awhile...hmm may have to give them a try....

Would any of you know how well does the scan D2904/7100-01 work off axis?

23rd November 2005, 01:05 AM	#1
trusound diyAudio Member Join Date: Aug 2005 Location: Missouri	What tweeter to use to match the C-Quenze? Well, I'm asking this question to the experts of been there done that... And I know this should be in the car audio section, but I think my situation is a little different... I am completly remaking my dash to accommodate an Aura NS18-992-4A that will free air into the motor compartment and fire towards the listener..My kick panels will extend from the floor to were the top of the dash used to be and free air into the fender wells.. I'm doing a three way and I already have my midrange and mid bass drivers. For midrange I have a set of Audio Technologies 15cm and for midbass I have the Audio Technologies 18cm. I am going a full active setup with fully adjustable xovers and eq... I am needing a tweeter that works well off axis and one that will match these drivers.. thanks for anybody who can help

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How do I match a woofer and tweeter?	chasingame	Multi-Way	3	6th August 2009 07:35 PM
dynaudio tweeter match and enclosure	beamnet	Multi-Way	35	20th March 2006 10:20 AM
Woofer/Tweeter match	Mjr7531	Multi-Way	5	5th April 2005 11:47 PM
cheapish tweeter to match with PHL 1360	dunderchief	Multi-Way	1	14th November 2004 10:51 PM
tweeter tweak/match	paulj	Multi-Way	2	21st May 2004 10:38 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

23rd November 2005, 01:39 AM	#2
David Gatti diyAudio Member Join Date: Mar 2004 Location: Melbourne, Australia	Most Cquenze users, including myself, are using the Morel Supreme 110, with very nice results.

23rd November 2005, 01:28 PM	#3
trusound diyAudio Member Join Date: Aug 2005 Location: Missouri	thanks for the reply!!!! I have a set of morel supremo's that have been collecting dust for awhile...hmm may have to give them a try.... Would any of you know how well does the scan D2904/7100-01 work off axis?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)