Help with designing a box - Page 2 - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 16th October 2002, 04:52 PM   #11
tom1356 is offline tom1356  United States
diyAudio Member
 
Join Date: Mar 2002
Location: boston
Thanks for all the help so far from everyone.
It looks like a sealed 3 cu ft tube is the only way to go.

For now I am not going to separate the drivers into individual compartments in the cabinets. The next pair might get this treatment just to compare the difference. The final incarnation of this design I vision having a Plasma super tweeter module mounted between the top and bottom cabinets and separate isobaric 12" subs. But thats a ways away.
This forum is just amazing! Thanks Agian!
__________________
My "cult-like" following is accepting applications.
  Reply With Quote
Old 17th October 2002, 04:45 AM   #12
navin is offline navin  India
diyAudio Member
 
navin's Avatar
 
Join Date: Jan 2002
Location: Mumbai (Bombay), India
Send a message via MSN to navin Send a message via Yahoo to navin
you can say that with 2 drivers in series each looks like an inductor to the other but the inductor value of teh drivers are a bit small and hence can be ignored. all the same with 2 drives in parallel each looks like an inductor to the other too only this "inductor is in parallel not series.

if you are not going to partition the cabinets atleast dont veneeer or finish it so you can add partitions later.
__________________
...still looking for the holy grail.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need help designing HPF add-on shaaregeulah Solid State 0 2nd May 2008 05:35 PM
Help designing a new set-up. djames03 Car Audio 4 12th May 2006 03:32 PM
Help please, designing a TL sub ShinOBIWAN Subwoofers 12 1st July 2004 04:14 PM
Designing for guys who like designing Sch3mat1c Tubes / Valves 14 31st August 2003 11:46 AM
This is the DAC which I`m designing purer Digital Source 12 26th July 2003 01:56 AM


New To Site? Need Help?

All times are GMT. The time now is 11:43 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2