5 inch woofers

homertooties · 20th November 2005, 09:27 AM

hi all
i have got 24 5 inch woofers i wish to put 12 in each cabinet i wish to build a slim cabinet out of 18 mm mdf (6inch wide 12 deep by ? tall)

They are ex Wharfdale but brand new,i wish to wir them up in series and parallel combinations to get an 8 ohm load.

QMS 2.70 QES 0.57 QTS 0.47 MMS 7.48 CMS 1.05 VAS 9.05 FS 56.77HZ IMP 4 OHM

I WISH TO RUN 12 FROM 1 CROSSOVER I DONT WHICH WILL BE BETTER SEALED OR PORTED.

ANY IDEAS ANYONE WILL BE MUCH APPRECIATED SHAME TO LEAVE THEM IN THE BOX THEY HAVE RUBBER SURROUNDS .......

homertooties · 20th November 2005, 04:24 PM

ALSO WILL BE ADDING TWEETER IST OR 2ND ORDER,SOME OF THE BASSES COULD BE USED AS MID BASSES IN SMALLER ENCLOSURES WITH IN THE OVERAL CAB ..

ANY IDEAS MUCH APPRECIATED...

pinkmouse · 20th November 2005, 04:29 PM

Please don't type in capitals, it's hard to read, and considered rude in just about every online community.

homertooties · 20th November 2005, 05:13 PM

Apologies for capital letters peoples newbie here

mondaycurse · 20th November 2005, 05:45 PM

I'm going to assume that the vas is in liters.
With winISD, you'll need a 6.615 cubic foot enclosure with 4 porst 3 inches in diameter (7 inches long) with a tuning of 48 hz.

20th November 2005, 09:27 AM	#1
homertooties diyAudio Member Join Date: Nov 2005 Location: suffolk	5 inch woofers hi all i have got 24 5 inch woofers i wish to put 12 in each cabinet i wish to build a slim cabinet out of 18 mm mdf (6inch wide 12 deep by ? tall) They are ex Wharfdale but brand new,i wish to wir them up in series and parallel combinations to get an 8 ohm load. QMS 2.70 QES 0.57 QTS 0.47 MMS 7.48 CMS 1.05 VAS 9.05 FS 56.77HZ IMP 4 OHM I WISH TO RUN 12 FROM 1 CROSSOVER I DONT WHICH WILL BE BETTER SEALED OR PORTED. ANY IDEAS ANYONE WILL BE MUCH APPRECIATED SHAME TO LEAVE THEM IN THE BOX THEY HAVE RUBBER SURROUNDS .......

20th November 2005, 04:24 PM	#2
homertooties diyAudio Member Join Date: Nov 2005 Location: suffolk	5 inch drivers x24 ALSO WILL BE ADDING TWEETER IST OR 2ND ORDER,SOME OF THE BASSES COULD BE USED AS MID BASSES IN SMALLER ENCLOSURES WITH IN THE OVERAL CAB .. ANY IDEAS MUCH APPRECIATED...

20th November 2005, 04:29 PM	#3
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	Please don't type in capitals, it's hard to read, and considered rude in just about every online community. __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

20th November 2005, 05:13 PM	#4
homertooties diyAudio Member Join Date: Nov 2005 Location: suffolk	apologies Apologies for capital letters peoples newbie here

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th November 2005, 05:45 PM	#5
mondaycurse diyAudio Member Join Date: Oct 2005	I'm going to assume that the vas is in liters. With winISD, you'll need a 6.615 cubic foot enclosure with 4 porst 3 inches in diameter (7 inches long) with a tuning of 48 hz.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
15 inch woofers: which have low moving mass?	elac310	Multi-Way	107	24th April 2012 11:11 PM
Four Inch Woofers Have 10	jagster	Swap Meet	0	18th April 2008 04:11 PM
Orion with 12 inch woofers	rt_jensen	Multi-Way	16	11th November 2004 09:00 AM
Plans for 3 way using Dayton 8 inch woofers	Mos Fetish	Multi-Way	7	8th July 2003 05:29 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read