Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Satelites/subs containing high end caraudio drivers
Satelites/subs containing high end caraudio drivers
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 5th November 2005, 08:57 PM   #1
FE3T is offline FE3T  Norway
diyAudio Member
 
Join Date: Dec 2004
Location: Close too Lillehammer
Default Satelites/subs containing high end caraudio drivers

I am considering building a pair of satelites/subs of some car audio drivers i have and would like some comments from people more experienced with DIY prosjects.

The Mid/high driver:
Click the image to open in full size.
Pic shows Macrom`s 4 inch Integra driver. made by Morel.
The cone are driven by a 54mm coil of aluminium wire and 3 stacked ferrite magnets.
the 28mm dome have Neodym magnets and have a damping chamber within the magnets driving the bass cone.
many will consider this a High end car speaker.

Mine have a bass sections from a pair of 58.10 midranges and sound similar, but should have a lower QT making them suitable for use from 200-250hz in a small sealed shamber

The Midbass speaker:
Click the image to open in full size.
Macrom 59.17 165mm. made by Morel
simulations show a qt 0,71 in a 13L sealed box and -3db at 80hz.

It is very tempting too use 2 pcs Hypex Active 3W plate amps with x over modules for 250 and 3200hz for these speakers.

Subs

Click the image to open in full size.
Rockford Fosgate RFR2212. this is 12inch woofers with dual 4 ohm 4 inch voicecoils.
I have 2 of them and plan too use them in 2 low Q sealed boxes with Hypex HS500 plate amps.

Have anyone played with similar combinations? and where the results satisfying?
  Reply With Quote

Reply


Satelites/subs containing high end caraudio driversHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Why not high compliance subs? Davide82 Car Audio 1 21st May 2006 06:00 PM
Why not high compliance subs? Davide82 Subwoofers 5 21st May 2006 03:36 PM
My car amp in CarAudio magazine lumanauw Car Audio 18 14th September 2005 08:14 PM
Using caraudio subdrivers in home dipole? amarenco1 Subwoofers 6 13th November 2004 05:50 AM
FS: horn subs, drivers, 'regular' subwoofer drivers John Sheerin Swap Meet 0 1st August 2004 11:33 PM


New To Site? Need Help?

All times are GMT. The time now is 12:24 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki