Remember CV`s 1215? what about a RF 1012? ;o)

FE3T · 25th September 2005, 11:08 AM

Do any of you remember Cervin Vegas 1215?
Its a tower with a 15" in the bottom. a 12" at the top of the front baffle and a 6" midrange + a 1" tweeter.

Pic are from a sligthly different version with dual 4,5" midranges
and black finish instead of the better looking walnut finish

I never was too found of the sound, but the look appealed to me.

So i consider too use some of the car audio drivers i have stored for a similar construction.

12" Rockford Fosgate RFR 2215 w 1000Wrms power handling in a ported cavity with driver and ports facing the floor (dual 4ohm coils make 8 ohm possible)
From 27-80hz

10" Rockford Fosgate RFP 1810 w 200Wrms powerhandling in a sealed cavity in the top of the cabinet (single 8ohm coil)
from 80-250hz

6,5" Macrom 59.17 w 120 Wrms powerhandling in a sealed cavity (4ohm) from 250-3000hz.

Finally a Macrom large flanged 1,2" softdome from 3000hz and up

Both Macrom drivers are made by Morel
All these drivers are in my opinion of superior quality compared too what CV used.

Any comments?

FE3T · 25th September 2005, 03:54 PM

Whoops sorry, a typo sneaked in and i didnt discover it before it was too late to edit.

The 12" woofers are RFR2212`s NOT RFR2215`s as i wrote earlier

25th September 2005, 11:08 AM	#1
FE3T diyAudio Member Join Date: Dec 2004 Location: Close too Lillehammer	Remember CV`s 1215? what about a RF 1012? ;o) Do any of you remember Cervin Vegas 1215? Its a tower with a 15" in the bottom. a 12" at the top of the front baffle and a 6" midrange + a 1" tweeter. Pic are from a sligthly different version with dual 4,5" midranges and black finish instead of the better looking walnut finish I never was too found of the sound, but the look appealed to me. So i consider too use some of the car audio drivers i have stored for a similar construction. 12" Rockford Fosgate RFR 2215 w 1000Wrms power handling in a ported cavity with driver and ports facing the floor (dual 4ohm coils make 8 ohm possible) From 27-80hz 10" Rockford Fosgate RFP 1810 w 200Wrms powerhandling in a sealed cavity in the top of the cabinet (single 8ohm coil) from 80-250hz 6,5" Macrom 59.17 w 120 Wrms powerhandling in a sealed cavity (4ohm) from 250-3000hz. Finally a Macrom large flanged 1,2" softdome from 3000hz and up Both Macrom drivers are made by Morel All these drivers are in my opinion of superior quality compared too what CV used. Any comments?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DOES anyone remember ACOUSTEC?	gain-wire	Analogue Source	18	11th March 2012 03:32 AM
Anyone remember... ?	MatthewS	Car Audio	0	10th May 2008 08:08 PM
who is old enough to remember	crs1	Car Audio	19	7th January 2008 09:50 PM
$139 tube amp but cant remember where i saw it...	xstephanx	Tubes / Valves	8	7th February 2007 12:36 AM
remember those ?:)	sss	Everything Else	8	1st December 2005 06:05 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th September 2005, 03:54 PM	#2
FE3T diyAudio Member Join Date: Dec 2004 Location: Close too Lillehammer	Whoops sorry, a typo sneaked in and i didnt discover it before it was too late to edit. The 12" woofers are RFR2212`s NOT RFR2215`s as i wrote earlier

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)