10" basS/mid for "party-speaker"

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi!

I´m looking for a 10" speaker to match my 1" "titanium-domes". Therefore the 10" needs to go pretty high whitout breaking up and making a lot of distortion.

The speakers are to be used as "party-speakers" which means that the efficiency is more important than "HiFi". - That said, I dont want them to be to crappy!

I have use a Zomax1065F (125W/94dB. Huge magnet, diacast chassis and a 65mm voicecoil) with this tweeter in the past and with a crossoverFreq. off 3.5Khz that was surprisingly good. Loud and clear. The only problem is that the Zomax is a pretty expensive (approx 100Euro)

I have been looking at sone Monacor units (approx 30Euro) but I have no experience with them. Any advice?

I need a 10" with a powerrating somewhere around 100W (RMS) and a sens about 93dB.

TroelsM.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.