Powered sub peaks
I got a 10" Dayton powered sub kit from Parts Express. I assembled it, and have been running some test tones into it. (Found a woofer problem in my ACI Sapphire doing this, which ACI promptly fixed!)
I have the standard RS SPL meter. C weighted, set to slow etc. I notice a pretty big response peak from 90hz to 100hz or so. I want 70 dB, but I get 80 dB.
I shut off the mains and the it dropped a few dB. I have a high pass filter in my Yamaha's pre/main loop, so that makes sense.
Is this 90 dB peak probably caused by the room acoustics? I can't really move things around, because this system is in my bedroom and placement is pretty much mandated.
|All times are GMT. The time now is 04:33 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2013 DragonByte Technologies Ltd. (Resources saved on this page: MySQL 30.00%)
Copyright ©1999-2013 diyAudio