line array wiring info.

[J.k.Wilson]

if one were going to try his luck at a line array of 6ea. 8" full range speakers into two towers equaling 12 total 8's and 1ea. "super tweeter" in each enclosure how shold they be wired to give me a total ohm rating of 4-8 ohm's the drivers are rated at 8ohms and the tweeters are at 8ohm too. So the picture would appear like this.....mmmtmmm or mmmmmmt any help would be of great need.

[tomcat9]

For the 8 inch drivers, 6 per cabinet, wire two sets of 3 drivers in parallel. Then wire these two sets in series. This will give you about 6 ohms total.

[tomcat9]

Not sure if what I said was clear. This may be a better way to say it.

Wire 3 drivers in parallel. Then wire the other 3 in parallel. Now wire these two sets in series.

[J.k.Wilson]

your my first and only response to three question so thankyou very much...