switch help for multi room sound system
hey guys finally got my multi room sound system off the ground, using aura sound ns3 193's, all the boxes are near completion and the wires will be run this week once the weather cools down. My question is what is the easiest way to wire switches in so I can select which rooms to play music through. I'm sure I'm missing something here but the only thing I can think of is a switch on each seperate speaker, which will be kinda a mess of switches and wires, is there a more efficient way of doing this that someone can think of?
Assuming your amp doesn't have speaker switching built in, then I guess you could run the speaker out from the amp to a switch box, and have a number of relays in it.
You could have switches on the front for selecting the output, and also could remote control, best thing is that you don't need high current switches as the work is being done by the relays.
just be carefull how many of your rooms you simultaneously switch on, or you might overload your amp (assuming you parallel connect all of the speakers).
Note I haven't done this myself, but it is how I would do it :)
downside I guess is you would need to power the relays, but a cheap plug pack should be all that is needed.
|All times are GMT. The time now is 01:05 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright ©1999-2015 diyAudio