How to measure an OB line array

goskers · 16th July 2005, 12:58 AM

Hello All,

I will be constructing an OB line array for nearfield use in a 2 channel hi-fi setup. These are not started yet but I am having an issue with getting good quality fs measurements from these. I will be using a DEQX PDC2.6P for processing functions so accurate measurements for xo functions will be critical to the final outcome.

If anyone has had any expereince with anything similar please let me know.

Thanks

wigginjs · 16th July 2005, 02:07 AM

I don't think I can help you with your project, but I just wanted to say from everything I've read thats a really great crossover you've chosen. Top notch.

Jim Griffin · 16th July 2005, 03:36 AM

I'm a little surprised that need separate measurements for the individual drivers. The measurements made by the DEQX system of your actual speakers as you go through its calibration process are adequate for crossover definition. The beauty of the DEQX is its included measurement/calibration capability.

16th July 2005, 12:58 AM	#1
goskers diyAudio Member Join Date: Feb 2003 Location: Illinois	How to measure an OB line array Hello All, I will be constructing an OB line array for nearfield use in a 2 channel hi-fi setup. These are not started yet but I am having an issue with getting good quality fs measurements from these. I will be using a DEQX PDC2.6P for processing functions so accurate measurements for xo functions will be critical to the final outcome. If anyone has had any expereince with anything similar please let me know. Thanks

16th July 2005, 02:07 AM	#2
wigginjs diyAudio Member Join Date: Dec 2003 Location: Columbia, SC	I don't think I can help you with your project, but I just wanted to say from everything I've read thats a really great crossover you've chosen. Top notch. __________________ The Four Chairs DIY Home Theater

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to combine Line array and transmission line together	Jared	Multi-Way	7	15th December 2012 01:20 PM
how to measure port centre line	busterno1	Subwoofers	1	30th September 2007 01:13 PM
Best way to measure line arrays?	mazeroth	Multi-Way	3	15th October 2005 12:31 AM
Line array tweeter line - On left or right?	dhenryp	Multi-Way	4	9th March 2005 11:35 PM
t-line subs for a DIY line array	tom1356	Multi-Way	17	28th December 2002 12:15 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th July 2005, 03:36 AM	#3
Jim Griffin diyAudio Member Join Date: Jun 2003 Location: Tennessee	I'm a little surprised that need separate measurements for the individual drivers. The measurements made by the DEQX system of your actual speakers as you go through its calibration process are adequate for crossover definition. The beauty of the DEQX is its included measurement/calibration capability.