2-way finished. Extremis- Seas combo

sasha · 30th June 2005, 02:02 AM

Here is few pix of my newly finished 2-way featuring Seas Excel T25-001 and Adire Extremis 6.8.
First listening tests are very promising. Extremis performs extremely well. In 22L box tuned to 33Hz
it goes very deep and controlled. Bass is smooth and no mid-bass peaking. It is crossed with my Behringer at 2kHz, 6 dB/octave. Seas is excellent in this combo. With 9dB attenuation it sounds very natural, almost but not quite like my electrostats.
Exteremis 6.8 highly recommended.
Regards,
Sasha.

sasha · 30th June 2005, 02:05 AM

more

sasha · 30th June 2005, 02:11 AM

.

sasha · 30th June 2005, 02:12 AM

,

ShinOBIWAN · 30th June 2005, 02:18 AM

Very nice work Sasha.

squalor · 30th June 2005, 02:28 AM

Very nice ! Adire rocks !
Tell us more about your cabs ?

tktran · 30th June 2005, 02:37 AM

Wow that is fantastic cabinetry.

Yes please tell us more about the veneer and how you finished them.

Do you have any measurement and crossover design facilities? A cabinet as good as that deserves and optimised crossover for long-term enjoyment.

sasha · 30th June 2005, 02:43 AM

Thanks,
Cabinets are made of 1" MDF and front is 2".
My next project: 12L box isobaric going down to33Hz anechoic and 25Hz in room and of course, Adire again. But this time on top I will try Vifa ring radiator.
By the way, I am still confused regarding efficiency of isobaric box. If I have two 86dB connected in parallel what is box efficiency. I have some contradictory infos.

sasha · 30th June 2005, 02:48 AM

Veener is Brasilian Imbya. Very nice but so hard to work with.
Crossover will be simple 6dB around 2K.

PHilgeman · 30th June 2005, 03:25 AM

How on earth do you get the edges like that?

Do you use contact cement, glue, press?

Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seas L26ROY subwoofer FINISHED PICS	Drakmin	Subwoofers	15	21st May 2011 10:55 PM
Seas excel and 18sound XT120 horn combo	Defo	Multi-Way	15	5th August 2009 10:52 AM
FS: Adire Extremis woofers and Seas DXT Tweeters	Tenson	Swap Meet	1	23rd January 2009 12:24 PM
Project Seas CA18RNX+22TAFG+Waveguide finished	Loiti	Multi-Way	8	23rd October 2006 10:37 AM
audax and seas combo	griff	Multi-Way	0	4th February 2002 06:59 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th June 2005, 02:18 AM	#5
ShinOBIWAN diyAudio Member Join Date: Feb 2004 Location: UK	Very nice work Sasha.

30th June 2005, 02:28 AM	#6
squalor diyAudio Member Join Date: May 2005 Location: Redneck Riviera	Very nice ! Adire rocks ! Tell us more about your cabs ?

30th June 2005, 02:37 AM	#7
tktran Account Disabled Join Date: Mar 2003 Location: Perth	Wow that is fantastic cabinetry. Yes please tell us more about the veneer and how you finished them. Do you have any measurement and crossover design facilities? A cabinet as good as that deserves and optimised crossover for long-term enjoyment.

30th June 2005, 02:43 AM	#8
sasha diyAudio Member Join Date: Aug 2002 Location: Canada	Thanks, Cabinets are made of 1" MDF and front is 2". My next project: 12L box isobaric going down to33Hz anechoic and 25Hz in room and of course, Adire again. But this time on top I will try Vifa ring radiator. By the way, I am still confused regarding efficiency of isobaric box. If I have two 86dB connected in parallel what is box efficiency. I have some contradictory infos.

30th June 2005, 02:48 AM	#9
sasha diyAudio Member Join Date: Aug 2002 Location: Canada	Veener is Brasilian Imbya. Very nice but so hard to work with. Crossover will be simple 6dB around 2K.

30th June 2005, 03:25 AM	#10
PHilgeman diyAudio Member Join Date: Dec 2003 Location: Arlington Heights, IL	How on earth do you get the edges like that? Do you use contact cement, glue, press? Thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)