Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

TS parameters and specs for these drivers???
TS parameters and specs for these drivers???
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 30th June 2005, 12:47 AM   #1
Bull is offline Bull  United Kingdom
diyAudio Member
Join Date: Oct 2002
Location: ...........
Default TS parameters and specs for these drivers???

I bought some loaded pa boxes today and managed to get the guy to try them out for me. I bought the lot for 150

Tops are : 2x 12 inch x 6 inch flare + RCL 393 phenolic comp drivers rated 50w rms each in 18mm plywood box.

Mids are: 2x dual 12 inch McKenzie Forte dual cone speakers rated 100w rms each driver,16 ohm each driver in 15mm ply boxes.Sealed cabs

Bass are: 2x 15 inch Celestion K15B-300 rated 300w rms each driver, 4ohms each in 18mm plywood slot reflex cab with chipboard baffle.

Well I can't complain as I got the whole lot for 150, and he tested them out with 3 amps and an active x over and sounded pretty good. But would like to change the chipboard baffles on the bassbins for plywood baffles and change the 1/4 inch jack inputs for speakon.

Top drivers are RCL 393 phenolic comp drivers, mids drivers are McKenzie Forte and bass are Celestion K15B-300. So does anyone know where more specs and ts parameters are for these drivers???

Would like to know the vc size,magnet weight,QTS,BL and Xmax for those drivers etc
  Reply With Quote
Old 9th March 2011, 01:15 PM   #2
wipe2000 is offline wipe2000
diyAudio Member
Join Date: Mar 2011
I know this is VERY old threat but Google found this when I was trying to find parameters of the Celestion K15B-300. They were so hard to find so I finally asked from the manufacturer. So if anyone is still interested:

Celestion K15B-300:

nom. diam. (inch) 15
voice coil diam. (mm/inch) 75/3
former material Kapton
coil winding length 11/0.43
magn. gap depth 8/0.31
overall depth 160/6.30
weight (kg) 6
freq. range 40-4k
sensitivity (1W@1m) 97
power handling (W) 300
nom. impedance (ohm) 8
Fs (Hz) 40
Re (ohm) 5.78
d 0.33/12.99
Sd 0.0855/132.5
Vas (l) 212.0/7.48
Mmt 69.9
Qes 0.665
Qms 4.863
Qts 0.585
Bl 12.7
Cms 0.2065
Rms 3.78
Xmax (mm/inch) 1.5/0.059
B (T) 0.96
Le (mH) 0.81
  Reply With Quote


TS parameters and specs for these drivers???Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
deriving T/S parameters from common specs hitsware Full Range 8 5th January 2009 03:12 AM
T/S parameters for horn drivers buggsson Multi-Way 7 25th March 2008 09:53 AM
Parameters for drivers iwahn Subwoofers 0 20th June 2007 10:13 PM
Ts parameters and multiple drivers bigmike216 Multi-Way 8 3rd October 2004 10:38 PM
T/S parameters for drivers in parallel teodorom Multi-Way 2 23rd April 2004 06:36 PM

New To Site? Need Help?

All times are GMT. The time now is 02:57 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio