soldering hifi speaker cable into 1/4 plug

saifq · 18th June 2005, 05:07 PM

hello everybody,

this is a great place where i can let my insecurity of soldering out. I want to solder a normal hifi speaker cable into a 1/4 jack. i donot have a volt-meter to check for +ve/-ve, and neither do i know which poles of the plug are +/-ve.

can anybody help me?

help will be very much appreciated

regards

saif

mik · 18th June 2005, 05:18 PM

http://g-force.info/electronics.htm

saifq · 19th June 2005, 09:32 PM

thansk very much for the info, but i also need to know, whether the red part of the speaker needs to be soldered onto tip or sleeve?

thanks

imix500 · 19th June 2005, 09:48 PM

Tip is positive.

18th June 2005, 05:07 PM	#1
saifq diyAudio Member Join Date: Jun 2005 Location: mboro	soldering hifi speaker cable into 1/4 plug hello everybody, this is a great place where i can let my insecurity of soldering out. I want to solder a normal hifi speaker cable into a 1/4 jack. i donot have a volt-meter to check for +ve/-ve, and neither do i know which poles of the plug are +/-ve. can anybody help me? help will be very much appreciated regards saif

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Soldering a tonearm cable - grounds	355F1	Analogue Source	2	9th March 2008 07:18 PM
WTB: 2.5mm plug to 3.5mm plug cable	Relax	Swap Meet	5	10th February 2007 01:13 AM
soldering headphone cable	meaghers	Headphone Systems	4	21st November 2006 12:48 AM
Question about soldering the balanced interconnect cable	rnzr	Analog Line Level	7	19th September 2006 02:24 PM
Correct Size Soldering tip for RCA plug	billiam	Analogue Source	3	11th March 2005 07:16 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

18th June 2005, 05:18 PM	#2
mik diyAudio Member Join Date: Dec 2001 Location: Serbia	http://g-force.info/electronics.htm

19th June 2005, 09:32 PM	#3
saifq diyAudio Member Join Date: Jun 2005 Location: mboro	thansk very much for the info, but i also need to know, whether the red part of the speaker needs to be soldered onto tip or sleeve? thanks

19th June 2005, 09:48 PM	#4
imix500 Proud Union Member diyAudio Member Join Date: Mar 2004 Location: Putnam, NY	Tip is positive.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)