Driver placement & enclosure design help

DPK · 15th June 2005, 07:00 AM

Help!

Need - THREE WAYS WITH CROSSOVER
ENCLOSURE SIZE - EXTERNAL - 40"x13"x10" (HxWxL)
MDF - 1"
What if i add another 8" woofer, please suggest.

Please see the setup detail

RMS INPUT POWER W 100

FREQUENCY RANGE Hz 90 / 14000
NUMBER OF WAYS - THREE
NOMINAL IMPEDANCE 8
CUT-OFF FREQUENCY Hz 290 / 28 K
SENSITIVITY db
TWEETER TYPE - Piezo
MID RANGE TYPE - 5" papercone
WOOFER MID BASS TYPE - 8" Plastic cone
TWEETER MAX DEPTH mm 13
MID BASS MAX DEPTH - 40mm
WOOFER MAX DEPTH - 75

Application - stereo(audio) , rock, classic.

(AMPLIFIER - TEAC AG780)

K-amps · 16th June 2005, 08:37 PM

There is clearly not enough information on your post for any one to help:

1) Get rid of CAPS, no one likes em.... your thread will be ignored.
2) You sense of urgency is not in line with others, this forum is not a paid subscription so while you will get helped, you need to set your own expectations in check.

3) Get rid of irrelevant info what amplifier u are using unless people ask because at this point it is cluttering your post.
4) Please provide the drivers T/S parameters or perhaps make and model.... saying that it is plastic wont help anyone...

I wish you a happy and productive search.

15th June 2005, 07:00 AM	#1
DPK diyAudio Member Join Date: Feb 2005 Location: Delhi	Driver placement & enclosure design help Help! Need - THREE WAYS WITH CROSSOVER ENCLOSURE SIZE - EXTERNAL - 40"x13"x10" (HxWxL) MDF - 1" What if i add another 8" woofer, please suggest. Please see the setup detail RMS INPUT POWER W 100 FREQUENCY RANGE Hz 90 / 14000 NUMBER OF WAYS - THREE NOMINAL IMPEDANCE 8 CUT-OFF FREQUENCY Hz 290 / 28 K SENSITIVITY db TWEETER TYPE - Piezo MID RANGE TYPE - 5" papercone WOOFER MID BASS TYPE - 8" Plastic cone TWEETER MAX DEPTH mm 13 MID BASS MAX DEPTH - 40mm WOOFER MAX DEPTH - 75 Application - stereo(audio) , rock, classic. (AMPLIFIER - TEAC AG780)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Most appropriate driver/enclosure/design for full orchestra source material?	DMD	Full Range	106	2nd January 2011 12:03 AM
driver placement	speedie	Multi-Way	4	9th August 2009 04:22 AM
BIB DRIVER PLACEMENT n' others	herpaw	Full Range	18	27th December 2006 08:53 AM
Ported Enclosure Design w/o Driver Theil-Small Parameters	misterbobman	Multi-Way	6	29th March 2005 02:06 PM
Need help on 3875 Rev 3 PCB placement in enclosure	ransom peek	Chip Amps	7	21st March 2005 08:19 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th June 2005, 08:37 PM	#2
K-amps diyAudio Member Join Date: Nov 2003 Location: Indiana	There is clearly not enough information on your post for any one to help: 1) Get rid of CAPS, no one likes em.... your thread will be ignored. 2) You sense of urgency is not in line with others, this forum is not a paid subscription so while you will get helped, you need to set your own expectations in check. 3) Get rid of irrelevant info what amplifier u are using unless people ask because at this point it is cluttering your post. 4) Please provide the drivers T/S parameters or perhaps make and model.... saying that it is plastic wont help anyone... I wish you a happy and productive search.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)