Optimum TL for this driver? (GM might want to take a look)

mr_push_pull · 3rd June 2005, 07:55 PM

With the risk of becoming the-official-troll-that-posts-a-thread-about-morel-on-diyaudio-every-half-an-hour I'm calling for GM and his magic formula for optimum transmission line for given driver

This is the driver http://www.eltimaudio.com/products/M...0datasheet.pdf
Just want to check if any improvement can be done to the TL Morelline design that's available with the above driver.
GM, are you still around?

GM · 3rd June 2005, 08:23 PM

Greets!

Not as much anymore. Don't know, a quick search only turned up ones for the 162 and 166.

GM

3rd June 2005, 07:55 PM	#1
mr_push_pull diyAudio Member Join Date: Mar 2004 Location: At the output stage	Optimum TL for this driver? (GM might want to take a look) With the risk of becoming the-official-troll-that-posts-a-thread-about-morel-on-diyaudio-every-half-an-hour I'm calling for GM and his magic formula for optimum transmission line for given driver This is the driver http://www.eltimaudio.com/products/M...0datasheet.pdf Just want to check if any improvement can be done to the TL Morelline design that's available with the above driver. GM, are you still around?

3rd June 2005, 08:23 PM	#2
GM diyAudio Member Join Date: Jun 2003 Location: Chamblee, Ga.	Re: Optimum TL for this driver? (GM might want to take a look) Greets! Not as much anymore. Don't know, a quick search only turned up ones for the 162 and 166. GM __________________ Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TSD-15 Optimum Loading	Justcallmedad	Analogue Source	21	30th October 2010 03:24 PM
Simple SE optimum layout for hum	webby	Tubes / Valves	22	30th July 2009 03:55 AM
Optimum value for volume control?	StoneT	Tubes / Valves	12	12th October 2007 02:53 PM
optimum pot value/ ubication?	federico moreno	Parts	4	27th June 2006 04:24 PM
Optimum cabinet for 3" Hi-Vi B3S single driver	MrDodo	Full Range	11	7th September 2005 04:57 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)