LspCAD Questions... - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 2nd June 2005, 01:37 AM   #1
diyAudio Member
 
Join Date: Feb 2003
Location: New Zealand
Default LspCAD Questions...

Hi

Measuring FR of 2.5 way bass reflex, outside.

Now...

Calibration for 2 channel mode, manual says connect sound card line out to line in. But with a stereo line in I'm assuming you connect both channels (left and right) to the line out. That's what I've been doing. Correct?

Also, when measuring port response, I assume I should measure with both woofers in parallel since that's how the port output will occur under normal listening conditions?

Thanks.

Mos
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
LspCAD noob help w/series x-over? critofur Multi-Way 2 25th April 2008 09:44 AM
Very basic questions regarding LSPCad and measurements fjhuerta Multi-Way 2 28th January 2006 02:41 PM
A couple of questions regarding LSPCad and MTM speakers fjhuerta Multi-Way 6 14th September 2005 10:22 PM
SoundEasy or LspCad? Vg Multi-Way 21 20th March 2005 10:10 PM
LSPCAD trouble 5th element Multi-Way 1 14th March 2004 09:05 PM


New To Site? Need Help?

All times are GMT. The time now is 05:51 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2