|Multi-Way Conventional loudspeakers with crossovers|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|31st May 2005, 06:29 AM||#1|
Join Date: May 2005
Location: Windsor Ontario
Need a passive low bass unit for Anthony Gallo Micros
I need to build a small passive low bass unit (subwoofer) for my Anthony Gallo Micros. (Full range 4" driver in a sphere)
The one that is sold with the package is a sphere with an 8 inch Peerless driver (dual voice coil) but it costs 300 bucks
I think I can build something that will work for cheaper than that ya think?
The Micros are 89db sensitivity and 8 ohms ea.
Bass response for the little guys are slim to none so I was thinking about a 125 hz crossover point?
My original plan was to find an 8" driver (dual voice coil) that will work well in a small sealed or vented enclosure and cross it over to the Gallos via a first order Butterworth at 125 hz.
Would this be a good plan of attack?
(of course the sesitivity of each voice coil would match that of the Gallos, or is that really important?)
Any suggestions would be greatly appreciated
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Help for bass unit incloser||pra3718||Subwoofers||4||23rd January 2009 03:45 PM|
|Cracked bass unit||nfcgfm||Multi-Way||3||17th April 2008 04:29 PM|
|Repairing bass unit in quad-63--HELP||Williams Audio||Planars & Exotics||2||14th October 2005 11:59 AM|
|Final 0.3 ELS bass unit and x/over||systema||Multi-Way||0||6th August 2005 07:56 AM|
|New To Site?||Need Help?|