old Fisher speakers, newbie questions - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 29th May 2005, 10:17 PM   #1
dtw2112 is offline dtw2112  United States
diyAudio Member
Join Date: May 2005
Location: ?
Default old Fisher speakers, newbie questions

I found a pair of speakers for $15 at the local Salvation Army. There is a sticker on the back that says:

The Fisher
Speaker System

The cabinets are about 2 feet tall, a foot wide, and a foot deep. They have a 2.75 inch tweeter, a 4 inch midrange, and a 9 inch woofer. (measurements are from the outer edges of the surrounds)

The woofer surrounds were intact when I bought them, but completely disintegrated when I brought them home and started using them.

Are these worth putting any time and money in to, either new drivers or new surrounds?
  Reply With Quote
Old 30th May 2005, 01:44 AM   #2
Ron E is offline Ron E  United States
diyAudio Member
Ron E's Avatar
Join Date: Jun 2002
Location: USA, MN
I think up through the early 70's fisher made good quality stuff. The fisher during the 80's was usually low-fi rack systems with cheap thin-walled cabinets.

If nothing else, they would be a pair of speakers you could practice putting new surrounds on.

post some images and someone may recognize them and give you better advice.
Our species needs, and deserves, a citizenry with minds wide awake and a basic understanding of how the world works. --Carl Sagan
Armaments, universal debt, and planned obsolescence--those are the three pillars of Western prosperity. Aldous Huxley
  Reply With Quote
Old 30th May 2005, 02:45 AM   #3
diyAudio Member
Bill Fitzpatrick's Avatar
Join Date: Jun 2001
Location: Eugene, OR
Fisher made lousy speakers and solid state gear. Their tube units were OK though.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Spice modeling of speakers, other newbie questions parallax Multi-Way 12 15th March 2013 12:17 PM
Fisher 600 questions akimball442 Tubes / Valves 25 13th July 2008 07:47 PM
Fisher 400 questions pageboy Tubes / Valves 19 16th May 2008 02:44 AM
Fisher 500B OPT/Feedback Questions wrenchone Tubes / Valves 22 16th December 2005 10:06 PM
Fisher RS-1020 questions and problems Jeffy74 Solid State 0 18th April 2004 08:40 PM

New To Site? Need Help?

All times are GMT. The time now is 08:05 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2