DIY Loudspeaker construction

sonu · 9th May 2005, 12:49 PM

ALL INVITED for sharing their knowledge for making really GOOD drivers, and full information can be shared for improving driver constuction.

As myself i have made a couple of not so good drivers for Pro 12", 15", 18" and still eager to make more driver & keep on improving.

I personally feel, most of the engineers should support for this thread, to let DIY know the common mistakes they do, while making drivers.

sonu · 10th May 2005, 01:50 PM

Ain't anybody anything to share for the DIY's

kelticwizard · 10th May 2005, 02:52 PM

Sonu:

that is because there have been at least two different threads on the same subject, and people have presumed you have checked them out first.

Here is one, by Ultima Thule:
Designing Own Speaker Elements

Vikash had one some time ago-I'll try to dig it up.

kelticwizard · 10th May 2005, 03:03 PM

And here is one from Vikash.
Diy dynamic driver

Check these out and see what you can get from them, then ask specific questions about how to proceed on your own.

By the way, will you be ordering the machined parts-the yoke, etc-or will you be machining them yourself?

9th May 2005, 12:49 PM	#1
sonu diyAudio Member Join Date: Apr 2004 Location: maharashtra	DIY Loudspeaker construction ALL INVITED for sharing their knowledge for making really GOOD drivers, and full information can be shared for improving driver constuction. As myself i have made a couple of not so good drivers for Pro 12", 15", 18" and still eager to make more driver & keep on improving. I personally feel, most of the engineers should support for this thread, to let DIY know the common mistakes they do, while making drivers.

10th May 2005, 02:52 PM	#3
kelticwizard diyAudio Member Join Date: Sep 2001 Location: Connecticut, The Nutmeg State	Sonu: that is because there have been at least two different threads on the same subject, and people have presumed you have checked them out first. Here is one, by Ultima Thule: Designing Own Speaker Elements Vikash had one some time ago-I'll try to dig it up. __________________ "A friend will help you move. A really good friend will help you move a body." -Anonymous

10th May 2005, 03:03 PM	#4
kelticwizard diyAudio Member Join Date: Sep 2001 Location: Connecticut, The Nutmeg State	And here is one from Vikash. Diy dynamic driver Check these out and see what you can get from them, then ask specific questions about how to proceed on your own. By the way, will you be ordering the machined parts-the yoke, etc-or will you be machining them yourself? __________________ "A friend will help you move. A really good friend will help you move a body." -Anonymous

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY loudspeaker vs. factory built loudspeaker	keyser	Multi-Way	83	16th May 2011 12:27 PM
Fibreglass loudspeaker construction	ShinOBIWAN	Multi-Way	33	2nd February 2008 03:22 PM
Cureved loudspeaker construction page started	Andy G	Multi-Way	33	31st January 2004 11:57 PM
Loudspeaker project from scratch - driver construction, cabinet, & crossover	UncleJessie	Multi-Way	19	20th April 2003 04:26 AM
Loudspeaker construction vs sound quality	josefr	Multi-Way	4	11th April 2003 06:24 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th May 2005, 01:50 PM	#2
sonu diyAudio Member Join Date: Apr 2004 Location: maharashtra	Ain't anybody anything to share for the DIY's

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read