Adhesive backed rubber feet

smallangryboy · 7th April 2005, 06:52 PM

I'm looking for hemispherical or conical adhesive backed rubber feet, either black grey or clear and wondered if anyone knew of any stockists or online retailers in the UK ?

The adhesive backing must be reasonably strong, and I'm looking at diameters of 10mm to 20mm and heights of 3mm up for the use on a loudspeaker stand.

Cheers

SAB

rabbitz · 8th April 2005, 12:56 PM

Have a look around for some 3M products. I use them under bookshelf speakers and once they're on there's no moving the sucker.

GrahamnDodder · 8th April 2005, 01:14 PM

Most hardware stores should carry them. But since you are not purchasing them at an audio store, you may have to prepare yourseld to spend far less money...

Puggie · 8th April 2005, 02:16 PM

try:
www.cpc.co.uk

rswww.com

and have a look at farnell,

B&Q do some but I'm not sure if they are big enough (might just be 10mm dia)

Ropie · 9th April 2005, 01:57 PM

I got mine from B&Q - they are approx 1.5cm across and make great, compliant speaker feet. £1.50 I think.

7th April 2005, 06:52 PM	#1
smallangryboy diyAudio Member Join Date: Dec 2004 Location: Oxfordshire	Adhesive backed rubber feet I'm looking for hemispherical or conical adhesive backed rubber feet, either black grey or clear and wondered if anyone knew of any stockists or online retailers in the UK ? The adhesive backing must be reasonably strong, and I'm looking at diameters of 10mm to 20mm and heights of 3mm up for the use on a loudspeaker stand. Cheers SAB

8th April 2005, 01:14 PM	#3
GrahamnDodder diyAudio Member Join Date: Jun 2003 Location: Near Baltimore, MD	Most hardware stores should carry them. But since you are not purchasing them at an audio store, you may have to prepare yourseld to spend far less money... __________________ I had the right to remain silent. I just didn't have the ability. (Comedian Ron White)

9th April 2005, 01:57 PM	#5
Ropie diyAudio Member Join Date: Jul 2003 Location: SW London	I got mine from B&Q - they are approx 1.5cm across and make great, compliant speaker feet. £1.50 I think. __________________ "A squid eating dough in a polyethylene bag is fast and bulbous, got me?"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open backed boxes ? Anyone ?	norman bates	Full Range	37	6th September 2008 02:19 AM
Adhesive for ESL panel repair	405man	Planars & Exotics	1	29th August 2007 02:47 PM
Where to buy rubber feet for speakers?	andy2	Multi-Way	11	26th November 2005 12:08 AM
Paper-backed vinyl: corners	DPW666	Multi-Way	4	23rd January 2003 07:42 PM
Problems with piggy backed TDA1541	Dr.H	Digital Source	2	24th May 2002 07:30 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

8th April 2005, 12:56 PM	#2
rabbitz diyAudio Member Join Date: Jul 2003 Location: Newcastle, Australia	Have a look around for some 3M products. I use them under bookshelf speakers and once they're on there's no moving the sucker.

8th April 2005, 02:16 PM	#4
Puggie diyAudio Member Join Date: Oct 2004	try: www.cpc.co.uk rswww.com and have a look at farnell, B&Q do some but I'm not sure if they are big enough (might just be 10mm dia)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read