Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Back Loaded Horn Bending
Back Loaded Horn Bending
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th April 2005, 09:04 PM   #11
pinkmouse is offline pinkmouse  Europe
diyAudio Moderator
 
pinkmouse's Avatar
 
Join Date: Apr 2002
Location: Rotherham, England
Back Loaded Horn Bending
http://www.klangform-akustik.de/
__________________
Rick: Oh Cliff / Sometimes it must be difficult not to feel as if / You really are a cliff / when fascists keep trying to push you over it! / Are they the lemmings / Or are you, Cliff? / Or are you Cliff?
  Reply With Quote
Old 14th April 2005, 09:28 PM   #12
planet10 is offline planet10  Canada
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Back Loaded Horn Bending
Quote:
Originally posted by pinkmouse
http://www.klangform-akustik.de/
Thanx PM... i rember passing by that bookmark... they look to be yet another maker of cool-looking horns

Click the image to open in full size.

dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 16th April 2005, 12:39 PM   #13
Tyimo is offline Tyimo  Hungary
diyAudio Member
 
Join Date: Nov 2002
Location: Hungary
Default Replikon

Hi!

Thanks, I already read the infos on the Klang-form akustik's site and also the dialog of Till Roemhild on the:

http://www.audiomap.de/forum/index.p...id/19186/page/

My question is:

Am I undersand theirs BLH method well?:
-the BIG pressure chamber behind the driver is tuned to the driver Fs. So Fc=Fs=55Hz ( The horn will amplify only the frequencies under the Fs and there will be no interferency between the horn's and the driver's direct radiations.)
-the Horn mouth tuned to 35 Hz = 4500cm2
-the horn lenght tuned to 45Hz = 1.2 m (?)
,but 1.2m=71Hz (!) and 1.91m would be the correct lenght for 45Hz. Are They sum up the pressure chamber lenght with the horn lenght to get the 1.9m?

Tyimo
  Reply With Quote
Old 16th April 2005, 06:52 PM   #14
planet10 is offline planet10  Canada
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Back Loaded Horn Bending
Default Re: Replikon

Quote:
Originally posted by Tyimo
Am I undersand theirs BLH method well?:
-the BIG pressure chamber behind the driver is tuned to the driver Fs. So Fc=Fs=55Hz ( The horn will amplify only the frequencies under the Fs and there will be no interferency between the horn's and the driver's direct radiations.)
-the Horn mouth tuned to 35 Hz = 4500cm2
-the horn lenght tuned to 45Hz = 1.2 m (?)
It is much more complex than that....

as an example.... for free space loading, the horn would need a diameter of 1566 mm to reach 35 hz Sitting on the floor you could divide the area in half.

dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote
Old 17th April 2005, 12:54 PM   #15
Tyimo is offline Tyimo  Hungary
diyAudio Member
 
Join Date: Nov 2002
Location: Hungary
Default Replikon

Yes,offcourse, but what about the short horn line lenght?

Tyimo
  Reply With Quote
Old 17th April 2005, 06:04 PM   #16
planet10 is offline planet10  Canada
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Back Loaded Horn Bending
Default Re: Replikon

Quote:
Originally posted by Tyimo
Yes,offcourse, but what about the short horn line lenght?
Ideally a horn should be at least a 1/4 wavelength long at its cutoff... short-horns have a lot of reflections and perhaps are better called wave-guides.

dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote

Reply


Back Loaded Horn BendingHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Front loaded and back loaded horn DrWoofer.com Subwoofers 14 12th April 2016 09:32 PM
Using PVC Pipe For A Back Loaded Horn JimOfOakCreek Full Range 13 15th April 2008 08:30 PM
Back loaded horn bipoles? What? Why? kaltsoplyn Full Range 6 20th February 2008 12:37 AM
Back Loaded Horn Calculations Tyimo Multi-Way 3 15th March 2005 04:34 PM
Would like details of this Back Loaded Horn mrlots2do Multi-Way 7 16th January 2005 03:54 AM


New To Site? Need Help?

All times are GMT. The time now is 11:55 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki