Sony speaker hookup problem

fenixviper · 7th March 2005, 09:32 PM

Hi,

i just got a sony dav-fc7 home theater in a box for really cheap but it doesnt include the speaker wires. Getting the wires is not a problem, but hooking them up will be. it uses a proprietary clip plug to plug into the receiver. it looks a lot like a telephone plug. ive looked all over the net for em with no success. anybody have any ideas? i may be able to get a picture later. thanks for the help

noodle_snacks · 8th March 2005, 01:59 AM

you may be able to pop open the boxes and determine the polarity from the crossover or drivers then replace the terminals with something standard like binding posts.

7th March 2005, 09:32 PM	#1
fenixviper diyAudio Member Join Date: Dec 2004 Location: Quebec	Sony speaker hookup problem Hi, i just got a sony dav-fc7 home theater in a box for really cheap but it doesnt include the speaker wires. Getting the wires is not a problem, but hooking them up will be. it uses a proprietary clip plug to plug into the receiver. it looks a lot like a telephone plug. ive looked all over the net for em with no success. anybody have any ideas? i may be able to get a picture later. thanks for the help

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bogen CT100 speaker hookup	fastback4	Solid State	4	5th May 2009 02:12 PM
Sony DTC-790 dat problem	dukasound	Digital Source	2	3rd October 2008 05:33 PM
best hookup wire inside a speaker	spwal	Multi-Way	8	5th January 2007 05:26 PM
computer/speaker hookup	buschdiver	Everything Else	3	11th December 2005 02:19 AM
Sony V-Fet Amp TA-N7B problem	Bernhard	Solid State	62	2nd March 2005 12:28 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

8th March 2005, 01:59 AM	#2
noodle_snacks diyAudio Member Join Date: Mar 2004 Location: Hobart, Tasmania	you may be able to pop open the boxes and determine the polarity from the crossover or drivers then replace the terminals with something standard like binding posts.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)