|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
26th February 2005, 04:15 AM
|
#1 |
|
diyAudio Member
Join Date: Mar 2003
Location: Ohio
|
Driver recco
Can anyone give me a recco for a high quality 7" driver that will be very flat in a .5 cubic foot sealed box, crossing at about 2500 with a ribbon tweeter (neo3). 2 way. 2 order low pass, 3 rd order high pass.
I am using a revelator today, and it just dies in the low end - for some reason much sooner than the model would predict. I am guessing its just made for a ported box and its too constrained by the sealed box below 200 hz. Also, the revelator has that typical rise between 1500 and 3k and I don't want to put a notch in the crossover. I could lower the low corner frequency but then I'd still have the low end issue. Thanks. ted. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FS: Silver Iris Coaxial 15" driver pair (sans XO and compression driver) | theAnonymous1 | Swap Meet | 0 | 24th April 2007 12:09 AM |
| driver recco please | TheoM | Multi-Way | 0 | 29th July 2005 03:54 AM |
| Driver/ driver configuration improve soundstage width | andy2 | Multi-Way | 6 | 16th June 2005 08:47 PM |
| Need driver recco for monitor design | TheoM | Multi-Way | 15 | 8th April 2003 04:30 PM |
| mtm versus tm driver recommendations on project with $500 driver and xo part limit | gsattler | Multi-Way | 4 | 20th May 2002 05:54 PM |
| New To Site? | Need Help? |
| Page generated in 0.05784 seconds (66.04% PHP - 33.96% MySQL) with 10 queries |
