Vifa + Monacor

kyote · 17th February 2005, 09:08 AM

Hello Folks,
has anyone build a speaker with the following Components?

Vifa BC14WG 49 4Ohm
Monacor DT25N

I would like to know how to design the XO.

kyote · 21st February 2005, 07:27 AM

So no one has made it?

shusha · 21st February 2005, 12:37 PM

I haven't found this Vifa driver. Do you have freq. graf? It will be a good point to start from. DT-25N is nice neodymium tweeter and you can go with 2,5kHz/12dB crossover point.

kyote · 21st February 2005, 01:53 PM

You can find it here
Vifa

This one is labeled a bit different, but its the same Speaker AFAIK.
The original Graph i got with the speakers looks simmilar to the one above.

kyote · 23rd February 2005, 08:18 AM

More Suggestions?

Lionel · 23rd February 2005, 09:51 AM

Quote:

More Suggestions?

If you have too much difference in sensitivity between mdibass and tweeter perhaps you would be interested in something like that :

Monacor + Beyma

Riso · 23rd February 2005, 07:07 PM

Design with DT-25n on my site www.castill.sk/upo , crossover 2nd 3,9 mikro / 0,33 mH + attentuator

17th February 2005, 09:08 AM	#1
kyote diyAudio Member Join Date: Oct 2004	Vifa + Monacor Hello Folks, has anyone build a speaker with the following Components? Vifa BC14WG 49 4Ohm Monacor DT25N I would like to know how to design the XO.

23rd February 2005, 07:07 PM	#7
Riso diyAudio Member Join Date: Feb 2005 Location: Slovakia	Monitor with DT-25N Design with DT-25n on my site www.castill.sk/upo , crossover 2nd 3,9 mikro / 0,33 mH + attentuator

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Little help needed - Vifa MG18 + Vifa DX25 - 2.5way	guitvinny	Multi-Way	12	10th May 2009 10:18 PM
Audax and Vifa tweeters, Monacor midrangers	kepa1	Swap Meet	1	14th May 2008 08:02 AM
Drivers for sale - Scan Speak, Visaton, Vifa, Max Fidelity, Monacor, Aurum Cantus...	atalio	Swap Meet	0	14th July 2007 11:58 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st February 2005, 07:27 AM	#2
kyote diyAudio Member Join Date: Oct 2004	So no one has made it?

21st February 2005, 12:37 PM	#3
shusha diyAudio Member Join Date: Sep 2004 Location: Velika Gorica	I haven't found this Vifa driver. Do you have freq. graf? It will be a good point to start from. DT-25N is nice neodymium tweeter and you can go with 2,5kHz/12dB crossover point.

21st February 2005, 01:53 PM	#4
kyote diyAudio Member Join Date: Oct 2004	You can find it here Vifa This one is labeled a bit different, but its the same Speaker AFAIK. The original Graph i got with the speakers looks simmilar to the one above.

23rd February 2005, 08:18 AM	#5
kyote diyAudio Member Join Date: Oct 2004	More Suggestions?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)