pinnacle 850 stopped working

jamesj2 · 14th February 2005, 06:35 AM

Help! I have a pair of pinnacle 850's that have been working great, until recently. My dog knocked it off the stand and one of the woofers won't work now. If I replace it with the other, the wiring works fine. I've inspected the bad one and looks fine, no disconected wires, or tears. but it acts like its not getting juice. Any ideas on how to fix? Any help would be appreciated.

wintermute · 14th February 2005, 09:48 AM

Only suggestion I have is to check that the wires from the terminals to the voice coil are still intact.

Actually get a DMM (in ohms mode), put it across the terminals and make sure you don't have an open circuit. If you do look at the above

Tony.

14th February 2005, 06:35 AM	#1
jamesj2 diyAudio Member Join Date: Feb 2005 Location: portland	pinnacle 850 stopped working Help! I have a pair of pinnacle 850's that have been working great, until recently. My dog knocked it off the stand and one of the woofers won't work now. If I replace it with the other, the wiring works fine. I've inspected the bad one and looks fine, no disconected wires, or tears. but it acts like its not getting juice. Any ideas on how to fix? Any help would be appreciated.

14th February 2005, 09:48 AM	#2
wintermute just another diyAudio Moderator Join Date: Aug 2003 Location: Sydney Blog Entries: 22	Only suggestion I have is to check that the wires from the terminals to the voice coil are still intact. Actually get a DMM (in ohms mode), put it across the terminals and make sure you don't have an open circuit. If you do look at the above Tony. __________________ Any intelligence I may appear to have is purely artificial! Some of my photos

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pinnacle AC-400 modding!	gripracer	Multi-Way	1	16th July 2009 04:33 PM
Cambridge Audio A3i stopped working...	Franne500	Solid State	1	1st May 2008 02:46 PM
el84 1 channel stopped working help	eddiedavies	Tubes / Valves	5	2nd April 2007 11:32 AM
Advice on fixing an old amp that has just stopped working	paulspencer	Solid State	2	6th March 2007 05:39 AM
HELP! My remote volume control stopped working! :(	paulspencer	Analog Line Level	14	15th October 2006 04:34 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)