|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
2nd February 2005, 11:21 PM
|
#1 |
|
diyAudio Member
Join Date: Apr 2002
Location: Newcastle, Australia
|
Some final pics of "Stacks" revisited and "Askew" with stand
|
|
|
2nd February 2005, 11:33 PM
|
#2 |
|
diyAudio Member
Join Date: Apr 2002
Location: Newcastle, Australia
|
And some brief notes...
The original "Stacks" used a Jaycar 5" woofer + an Audax TM020j? tweeter (the plastic one, yuck!)
I decided that better drivers were the go, so now it uses the Peerless 5" HDS + Vifa D26NC15 The flush mounting of these drivers was done 'old style' using a hammer and chisel !!! "Askew" always was going to get a stand, I finally got around to making some. The tweeters in these are a pair of old Yamaha JA somethings I picked up for zip, and man did they cause some trouble! If you look closely you can see that they have jumper braids on the front. These had decayed, and had to be replaced. I finally ended up using some wire from the inside of an old tonearm !! My eyes are getting a bit past that sort of thing !!!!! But all's well that ends well, that is a rather nice tweeter and the combination with the 8" Jaycar carbon is rather nice to listen to :-)) |
|
|
|
3rd February 2005, 06:07 AM
|
#3 |
|
frugal-phile(tm)
diyAudio Moderator
|
No rectangular boxes at Andy's house -- i'd sure like to see the coneheads get resurected some day
 dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What makes an amplifier "bright", "warm", or "neutral"? | JohnS | Solid State | 51 | 13th December 2009 06:42 PM |
| "Best" sub from a build quality stand point? | buggsson | Car Audio | 43 | 8th August 2008 02:32 PM |
| Super Sanken Final Stage "Tauro" | Stee | Solid State | 25 | 19th March 2008 08:01 PM |
| "More stuff" final clearance sale. | Colescuttle | Swap Meet | 6 | 5th January 2007 02:29 PM |
| "Integrated" or "stand alone" | RenegadeAmps | Tubes / Valves | 13 | 11th October 2006 08:05 PM |
| New To Site? | Need Help? |
