MW vs. H series morel woofer

[ermes]

what are main differences in sound between MV and H series of morel woofers ??

regards

[Audist]

MW and H series very similar in sound quality.
The H 5.1 and 5.2 and the H 6 have only 54 mm Voice coil Vs 75 mm of MW. What mean to small magnet from the MW. so the use with Hybrid magnet have necessary.
H-8 inch is different.

The H series good for midrange and low mid application IMO.

I think the new HU line to be very very good! and superior from MW and H.

Pay only 35$~ extra for the HU631 from the MW 168/166/164 or H 6 inch and got better sound quality and extra details!

[Mason @ B&M]

I doubt the MW and H series have a similar sound quality..

The specs for the MW and HU ranges still appear to be very similar, although the face that the Le has gone from 0.08 to 0.63 suggests that either the HU ranges don't use the neo magnet structure or have removed the copper shorting ring from the driver..

The neo magnet and copper shorting ring is the main difference between the neolin drivers over the other MW series.

and the MW Neolin drivers are still more expensive on partsexpress than the new HU line..

[Audist]

Originally posted by Mason @ B&M
I doubt the MW and H series have a similar sound quality..

The specs for the MW and HU ranges still appear to be very similar, although the face that the Le has gone from 0.08 to 0.63 suggests that either the HU ranges don't use the neo magnet structure or have removed the copper shorting ring from the driver..

The neo magnet and copper shorting ring is the main difference between the neolin drivers over the other MW series.

and the MW Neolin drivers are still more expensive on partsexpress than the new HU line..

You right,
But the HU use with better chassis and Neo and ferrite magnet (Hybrid) and better spider also.

[Vince35]

I think the new HU line to be very very good! and superior from MW and H.

Where can you find any informations about this new "HU" line ?

Thanks,

Vincent

[ermes]

hi vince35!,

i already know you !,we met in onother forum,fine!

sorry ,but there are few info about hu morel line.......madisound,may be help you in data sheet,the hu 9.1 in on theyr stock.
i don't found any official dats about itrobably is too new.

......be patient.......

regards

[Vince35]

Originally posted by ermes
hi vince35!,

i already know you !,we met in onother forum,fine!

Well, sorry, I can't remember...
What was the topic ?

sorry ,but there are few info about hu morel line.......madisound,may be help you in data sheet,the hu 9.1 in on theyr stock.
i don't found any official dats about itrobably is too new.

......be patient.......

regards

Thanks, so my curiosity have to wait.


Vincent

[cody6766]

just a warning about the mw166's...they have no low end.

I had a pair in my car and they would distort badly with anything below 125hz at moderate-high volume levels. I had them running IB in my doors (deadened to block the backwave) and also in sealed kick pannels and they still performend poorly down low. They did sound very nice up top though.

[pinkmouse]

I disagree completely. In a good sealed box you get very nice low end, true they don't go really deep but they certainly don't behave as you describe.

[Audist]

Originally posted by Vince35

Where can you find any informations about this new "HU" line ?

Thanks,

Vincent

I have all the data of Morel driver in EXCEL file. but I cannot send it here.
I try Zip the Excel file here and hope is working.

Good luck