Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

single or dual mids
single or dual mids
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 19th December 2004, 03:38 PM   #1
mp006ltk is offline mp006ltk  United States
diyAudio Member
 
Join Date: Oct 2004
Default single or dual mids

Thanks for the help below, I may have to just buy ac ouple of units and sell off what I don't use. I am in debate though if I should use a single mid or use dual mid for efficiency. The SS, Seas And Accuton are all atleast at that 89db mark, and if I ise two I could really extend the efficiency. Are there any tradeoffs for the extra 3 db? Also I would be forced to use either the Seas or the Accuton because the SS is a 4 ohm driver. My speaker design will be a 4 ohm over all design the ss ring tweeter is 4 and the two eton's in parralell will be 4 so I can either use one scansoeak 15m or 2 seas excel 15m's Thanks in advance.
  Reply With Quote
Old 19th December 2004, 05:05 PM   #2
AudioFreak is offline AudioFreak  Australia
Warp Engineer
On Holiday
 
AudioFreak's Avatar
 
Join Date: Oct 2001
Location: Queensland, Australia
single or dual mids
Default Re: single or dual mids

The 3dB due to increased Sd is only seen in the bass region.
__________________
- Dan
  Reply With Quote

Reply


single or dual midsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aleph 5 single PS or dual? Leeuwarden Pass Labs 24 8th December 2014 01:48 PM
Use a single secondary x-former as dual PSU? pixworld Chip Amps 7 9th March 2009 01:32 PM
Single or dual bridge and why? ▀art West-VL. Power Supplies 38 18th February 2008 10:47 PM
Seas Excel mids vs. dayton rs mids in dipole sqlkev Multi-Way 2 10th July 2006 07:28 PM


New To Site? Need Help?

All times are GMT. The time now is 02:15 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki