I have a pair of H 30 LB SAG and I want to use the Aurum Cantus
G1 Ribbon . I know that the Phy reach `~to around 8Khz must people are using with this driver the ESG2 ribbon but I search over the web and could not find anybody selling them . This speaker is not going to be an open baffle , will be a reflex loaded enclosure. I would like to know if anybody out there already "play" with this drivers and if is possible get a schematic of the crossover . On the other hand if you know about people that make custom crossover network it will be helpful too.
Thanks for looking!!!
G1 Ribbon . I know that the Phy reach `~to around 8Khz must people are using with this driver the ESG2 ribbon but I search over the web and could not find anybody selling them . This speaker is not going to be an open baffle , will be a reflex loaded enclosure. I would like to know if anybody out there already "play" with this drivers and if is possible get a schematic of the crossover . On the other hand if you know about people that make custom crossover network it will be helpful too.
Thanks for looking!!!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.