|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
29th November 2004, 06:24 AM
|
#1 |
|
diyAudio Member
Join Date: Jun 2001
Location: Eugene, OR
|
Enclosure/constrained layer type question
Panels A, B, C and D are attached to a woofer enclosure via screws. Between the panels and enclosure is a thin piece of rubber of a type and thickness similar to that found in innertubes (remember those?).
Does this gain me anything? |
|
|
29th November 2004, 03:23 PM
|
#2 |
|
diyAudio Member
Join Date: Jun 2001
Location: Eugene, OR
|
bump
|
|
|
|
29th November 2004, 03:50 PM
|
#3 |
|
diyAudio Member
Join Date: Apr 2004
Location: Tampa, FL
|
The screws cause a short circuit into the enclosure. The best way to do this would be to use some sort of adhesive to attach the panels. "Liquid Nails" seems to be the adhesive of the week, I have done similar things with Alex Plus silicone/latex caulk, I just didn't use the rubber as well (I guess the silicone is rubber technically).
John |
|
|
|
29th November 2004, 08:13 PM
|
#4 |
|
diyAudio Member
Join Date: Nov 2003
Location: flyover country
|
I did something similar with a high solids contact cement (30%) between two 3/8" thick sheets of plywood. I used brass screws only around the perimeters of the individually cut pieces where needed to minimize potential degradation because of their transmissive effect.
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Adhesive/materials for Constrained Layer Damping | Paul W | Multi-Way | 24 | 27th October 2008 04:35 AM |
| Constrained layer damping / thin metal / fibreglass layer | RobWells | Multi-Way | 3 | 6th August 2007 05:50 AM |
| Different ways to constrained layer construction/ damping - Wilson Audio v DIY | rick57 | Multi-Way | 12 | 20th March 2007 02:40 AM |
| how to mount drivers in cabinets with CLD (constrained layer damping) structure? | Spilferderber | Multi-Way | 15 | 15th November 2006 06:54 AM |
| Combining constrained layer damping and bracing | rick57 | Multi-Way | 9 | 29th November 2004 03:06 AM |
| New To Site? | Need Help? |
| Page generated in 0.08599 seconds (59.79% PHP - 40.21% MySQL) with 11 queries |
