My Seas based TL beauty

[Bricolo]

Originally posted by carlosfm


Are you serious?
Cold (for us), at day between 10~15º C, but sunshine and clean sky.
Next time bring your speakers.

10°C cold?!

It's 0°C here!

[Eccu]

Originally posted by Bricolo

10°C cold?!

It's 0°C here!

Really! It's -18°C here at the moment!
Winter is ineluctable.

[carlosfm]

Originally posted by Eccu
Really! It's -18°C here at the moment!
Winter is ineluctable.

18ºC in Finland?
In November?
Are you at the beach?

[roibm]

Originally posted by planet10


Well, i doubt there is any output from the tweet inside the box

The irregular thickness of the panels will dramatically change the resonance character of the panels.. it should spread the Q of any such resonances making them harder to excite.

I'm not sure the tweeter box is also milled.
He said "This is milled interier of TL cabinet".

[carlosfm]

As I see it, the tweeter is on a separate box.
And the tweeter is not open-back, of course.

[Gasho]

What is this? A weather cast? . Ok it is close to winter here , about 8-12 degrees Celsius. I don´t like winter

[Gasho]

Originally posted by carlosfm

As I see it, the tweeter is on a separate box.
And the tweeter is not open-back, of course.

The tweeter has itœ own orginal chamber. The only thig tweeters "box" i for, is crossover and connectors on back. There is no acoustic output from rear side of tweeter. Yes and i forget to mention , all panels of this loudspeaker are 30mm HDF , I milled all needed spaces for big coil in lowpass cection of crossover and for tweeters big magnet/chamber structure.