|
|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Apr 2004
Location: Winnipeg, Manitoba
|
Hi, I found these tweeters in my closet. I was wondering if someone could help identify them. See picture.
I have 3 pairs of the silver ones and one pair of the dome tweeters. I understand the silver one is a JBL tweeter. The markings are: 58P60DH-01HD C5 Wave Made In Japan The dome tweeters are: E69828 281TMB If you look closely at the picture, you will see a dimple in the dome. They both have this dimple, so i assume it is part of the design. I am particulary interested in specifications. Cheers, GM. |
|
|
|
|
#2 |
|
diyAudio Member
Join Date: Feb 2003
Location: Salt Lake City, UT, USA
|
The JBL looks like it is from a Control 5. There are no published specs for this tweeter as far as I know. The other one actually looks alot like a Fostex. I'm not positive though.
Cheers, Zach
__________________
Ahhhhhhhhh...............That's what that button does. |
|
|
|
|
#3 |
|
diyAudio Member
Join Date: Apr 2004
Location: Winnipeg, Manitoba
|
No luck finding any info on the tweeter with a lens, but I did find the JBL tweeter on eBay:
http://cgi.ebay.ca/ws/eBayISAPI.dll?...tem=5724521418 The tweeter was used in the JBL Control 5 monitor series of speakers and the following specs are noted: 1" Pure titanium dome magnet, 8oz. 8ohm voice coil, RMS/Peak 25w/50w, SPL 1W/1 - 96dB, 2KHz~22KHz frequency response. Tweeters have an outside diameter of 3.25" . Do those numbers seem reasonable. The efficiency seems high. Cheers, GM. |
|
|
|
|
#4 |
|
diyAudio Member
Join Date: Feb 2003
Location: Salt Lake City, UT, USA
|
That efficiency is very possible for the Control 5 tweeter. As for the rest, I've never tested one.
Cheers, Zach
__________________
Ahhhhhhhhh...............That's what that button does. |
|
|
|
|
#5 | |
|
diyAudio Member
Join Date: Apr 2004
Location: Winnipeg, Manitoba
|
Quote:
I have played around with them and looked at the crossover used in the Control 5. My best guess would be that the efficiency is about 88 - 90 dB. 96 is way too high. GM. |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Jumper identification HELP | JC Fardo | Parts | 0 | 6th May 2009 11:28 AM |
| Help with Cap identification | SVinzant | Parts | 3 | 22nd January 2009 12:54 PM |
| Need identification if possible. | es44 | Full Range | 2 | 11th September 2008 08:38 AM |
| New To Site? | Need Help? |
| Page generated in 0.07678 seconds (73.96% PHP - 26.04% MySQL) with 11 queries |