Looking for a professional Xover designer in Florida !!!

BenY · 14th August 2004, 05:48 PM

Hi to all,
I`m looking for an expert to re-design a friend`s ribbon speakers passive Xover after he actively bi-amped the system.
This is a three way Apogee Diva that needs a new and perfected passive mid/tweeter Xover .
the requirements are: to be able to bring the mid/high in line with the woofer in terms of level phase and pulse and make sure the speakers sound coherent.
This is a challenging job if you are a true master...

I will also take recommendations.

It`s in the Fort Lauderdale, FL area.

Thank you,
Yuval.

454Casull · 14th August 2004, 11:21 PM

A few people will do it for free here.

BenY · 15th August 2004, 05:55 AM

Hi,
Getting someone that knows something and will do it for free is not what we are looking for.

We are looking for an expert with credentials that we can count on to do a high quality job,and he will be paid accordingly.

Thanks,

Yuval.

BenY · 23rd August 2004, 01:13 PM

Hi there,
Anyone out there who can take the challenge ??

It`s not too difficult....

All you need is a resonably good mesurement system,and the knolage to extract driver data plus a good simulation software to run a virtual crossover and test the operation...
And above all,the good sense to figure out what to do with the data and how to manipulate the prameters to get a good overall preformance out of the speaker.

please send me a note If you know a good proffesional whom you could recommend.

Thanks in advance,

Yuval.

AR_sound · 16th April 2006, 08:30 PM

Hi Yuval,

It's may be out of topic, but Iv'e seen you interested in Hypex amp?

Have you heard hypex in here (Israel),

You can give me a call: 08-9719091, I'm free at the moment

Avi.

14th August 2004, 05:48 PM	#1
BenY diyAudio Member Join Date: Jul 2002 Location: ISRAEL	Looking for a professional Xover designer in Florida !!! Hi to all, I`m looking for an expert to re-design a friend`s ribbon speakers passive Xover after he actively bi-amped the system. This is a three way Apogee Diva that needs a new and perfected passive mid/tweeter Xover . the requirements are: to be able to bring the mid/high in line with the woofer in terms of level phase and pulse and make sure the speakers sound coherent. This is a challenging job if you are a true master... I will also take recommendations. It`s in the Fort Lauderdale, FL area. Thank you, Yuval.

16th April 2006, 08:30 PM	#5
AR_sound diyAudio Member Join Date: Jun 2004 Location: Modiin	Hypex Hi Yuval, It's may be out of topic, but Iv'e seen you interested in Hypex amp? Have you heard hypex in here (Israel), You can give me a call: 08-9719091, I'm free at the moment Avi.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hello from Florida	rockrink	Introductions	3	26th December 2007 07:54 PM
New guy from Florida	NO1B4ME	Introductions	1	24th April 2007 12:23 AM
Newbie from Florida...	edgebc	Introductions	1	17th April 2007 03:18 PM
hello from florida	vixr	Introductions	1	17th February 2006 02:23 AM
Welcome ststone from Florida's Sun	gromanswe	Introductions	2	29th July 2002 06:56 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th August 2004, 11:21 PM	#2
454Casull diyAudio Member Join Date: Jan 2004 Location: Toronto, ON, Canada	A few people will do it for free here.

15th August 2004, 05:55 AM	#3
BenY diyAudio Member Join Date: Jul 2002 Location: ISRAEL	Hi, Getting someone that knows something and will do it for free is not what we are looking for. We are looking for an expert with credentials that we can count on to do a high quality job,and he will be paid accordingly. Thanks, Yuval.

23rd August 2004, 01:13 PM	#4
BenY diyAudio Member Join Date: Jul 2002 Location: ISRAEL	Hi there, Anyone out there who can take the challenge ?? It`s not too difficult.... All you need is a resonably good mesurement system,and the knolage to extract driver data plus a good simulation software to run a virtual crossover and test the operation... And above all,the good sense to figure out what to do with the data and how to manipulate the prameters to get a good overall preformance out of the speaker. please send me a note If you know a good proffesional whom you could recommend. Thanks in advance, Yuval.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)