|Multi-Way Conventional loudspeakers with crossovers|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|4th June 2002, 04:02 AM||#1|
Join Date: Mar 2002
Location: Chicago Suburbs
help w/ enclosure sizing
hey, im planning on making a sonosub....
24 inch dia tube...
adire shiva mark iii...
4 inch flared port...
now ive tried running winisd and lspcad, but i have no clue what im doing... like adding polyfill and wall damping foam, and as well as sizing the enclosure...
can anyone give me some help figuring out a good size to make my sub....
im probably going to have a 3/4 incd plug in each end of the tube along with a 3/4 inch cap on the top for a nice finish... downfiring sub and a downward opened port...
it will most likey use it for home theater.. i dont have audiophile quality equipment, but i still want it to sound good.. something for mainly HT but some music...
if anyone has the time to throw together some numbers for me i would be very appreciative!!
~thanks for any help guys....
dabbling in the DIY audio realm
|4th June 2002, 04:32 AM||#2|
Join Date: Dec 2001
in a rush, ill get back to you soon
this is all you need for some research.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Help sizing psu smoothing cap||riotubes||Parts||5||8th July 2009 08:07 PM|
|Sizing PP OPT||alexg||Tubes / Valves||14||11th June 2007 08:19 AM|
|Sizing capacitors||preiter||Power Supplies||5||29th May 2006 05:48 AM|
|Sizing a Regulator||cantskienuf||Tubes / Valves||5||17th May 2005 04:55 AM|
|Sizing thermistors||eeka chu||Parts||7||19th December 2004 08:03 PM|
|New To Site?||Need Help?|