Cornu spiral horns
Has anyone heard these? I think what a great idea. What a way of getting the most out of your drivers. I wonder if you could make them for bigger drivers? (sorry Daniel, I should have asked you first)
Anyone tried making something like them? I couldn't find a good link to a picture on google so I'm hoping someone has a link or some experience with them.
I haven't heard the Cornu spiral horns, but have been following the story about them and listening impressions on a german DIY-forum (Audiotreff).
So far only versions for smaller drivers are existing, but Daniel (the man behind Cornu) has been trying bigger ones also (as far as I know). Supposedly they are sounding very good with a tendency to the "warm" side, peak levels are very limited though but OK with regard to the size of the driver.
Attached you'll find a picture of them posted by some other german DIY-enthusiast..
I think may be larger drivers the traditional horn will be a easier to construct - trade off way , i guess it will be diffcult to turn large spirals , keep them from leaking into each other with the two large flat baffles , unless the spirals are made to be modular
more of a construction thing
transducer design engineer
a look from a side, there are four horns, one at each side, but it sounds n o t load, the thin wood vibrates than.
ups, the picture ist too great, please look at
|All times are GMT. The time now is 03:51 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright ©1999-2016 diyAudio