Tempo cabinet plans

rebojorge · 6th July 2004, 12:58 AM

Hi there!!

I will be putting together the Tempo speakers that were in Humble made HIFI.... I have read in other threads that this site went down because of too much traffic to it.

Can anyone provide the cabinet plans for this speaker, or know Tony Gee´s e'mail so I can contact him and ask for them.

Thanks!

.... I already have the drivers and crossover components and can´t wait to get sarted.

Rocky · 6th July 2004, 01:38 AM

You might have luck at the following link:
http://web.archive.org/web/*/http://...t.nl/~geenius/

Edit: I was just browsing some of the pages, I believe the stored copies of geenius' pages are made prior to the Tempo project.. Sorry..

ALFIrE · 6th July 2004, 07:50 AM

try:

humblehomemadehifi@lycos.com

Geenius · 6th July 2004, 08:31 AM

Sorry my site is still down. My provider is a little slow to get things up and running again!

p.s. Hi eveyone!

rebojorge · 6th July 2004, 05:02 PM

thanks for the replies guys.... I´ll try to mail tony.

454Casull · 6th July 2004, 11:36 PM

Quote:

Originally posted by Geenius
Sorry my site is still down. My provider is a little slow to get things up and running again!

p.s. Hi eveyone!

Hi!

gurpreetsingh · 27th June 2012, 06:45 AM

Guys, anyone having "Tempo" (speaker cabinet by Humble Homemade) detailed drawing, please share it with me or email me at gurpreet.singh@pentair.com

system7 · 27th June 2012, 10:53 AM

Quote:

Originally Posted by gurpreetsingh

Guys, anyone having "Tempo" (speaker cabinet by Humble Homemade) detailed drawing, please share it with me or email me at gurpreet.singh@pentair.com

You've got mail...best I can do.

gurpreetsingh · 27th June 2012, 11:06 AM

Quote:

Originally Posted by system7

You've got mail...best I can do.

Thanks alot !!!!

gurpreetsingh · 28th June 2012, 03:58 AM

Hi Guys,

Finally I planned to build speakers from "Tony Gee" design, (THE TEMPO). I have all the drawings for cabinets and I am arranging for drivers.
I want to know that can I use my "Lanzar" car amplifier to drive these speakers.
Here is the link for amplifier"
Lanzar - VCT4110 - 2000 Watt 4 Channel High Power MOSFET Amplifier

Specs are:

1. 50 X 4 Watts at 4 Ohm (RMS), 4 channals
2. Frequency response: 50Hz to 30 KHz
3. S/N Ration: >95dB
4. Bult in cross over filter:
High Pass: 40 Hz to 250 Hz
Low Pass: 40 Hz to 250 Hz.
Also do I need to build a separate cross over for the speakers as shown in "TEMPO" manual as I have crossover in my Amplifier.

If this amplifier will not work then what should be the specificatons to run these speakers.

6th July 2004, 12:58 AM	#1
rebojorge diyAudio Member Join Date: Dec 2002 Location: Mexico	Tempo cabinet plans Hi there!! I will be putting together the Tempo speakers that were in Humble made HIFI.... I have read in other threads that this site went down because of too much traffic to it. Can anyone provide the cabinet plans for this speaker, or know Tony Gee´s e'mail so I can contact him and ask for them. Thanks! .... I already have the drivers and crossover components and can´t wait to get sarted.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
eaw cabinet plans	Socaflex	Multi-Way	28	23rd January 2013 12:24 PM
need Manifold 2 x 18 cabinet plans	djmarvellous	Subwoofers	70	18th March 2011 11:18 PM
AN-E cabinet plans...	cypher	Multi-Way	14	27th June 2007 08:06 PM
BLH Cabinet plans	fin1bxn	Full Range	3	27th June 2006 04:03 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th July 2004, 01:38 AM	#2
Rocky diyAudio Member Join Date: Apr 2004 Location: Kongsberg/Oslo	You might have luck at the following link: http://web.archive.org/web/*/http://...t.nl/~geenius/ Edit: I was just browsing some of the pages, I believe the stored copies of geenius' pages are made prior to the Tempo project.. Sorry..

6th July 2004, 07:50 AM	#3
ALFIrE diyAudio Member Join Date: Oct 2003 Location: vlaanderen	try: humblehomemadehifi@lycos.com

6th July 2004, 08:31 AM	#4
Geenius diyAudio Member Join Date: Jul 2004 Location: near Amsterdam	Sorry my site is still down. My provider is a little slow to get things up and running again! p.s. Hi eveyone!

6th July 2004, 05:02 PM	#5
rebojorge diyAudio Member Join Date: Dec 2002 Location: Mexico	thanks for the replies guys.... I´ll try to mail tony.

27th June 2012, 06:45 AM	#7
gurpreetsingh diyAudio Member Join Date: Jun 2012 Location: Delhi, India	Guys, anyone having "Tempo" (speaker cabinet by Humble Homemade) detailed drawing, please share it with me or email me at gurpreet.singh@pentair.com

28th June 2012, 03:58 AM	#10
gurpreetsingh diyAudio Member Join Date: Jun 2012 Location: Delhi, India	Hi Guys, Finally I planned to build speakers from "Tony Gee" design, (THE TEMPO). I have all the drawings for cabinets and I am arranging for drivers. I want to know that can I use my "Lanzar" car amplifier to drive these speakers. Here is the link for amplifier" Lanzar - VCT4110 - 2000 Watt 4 Channel High Power MOSFET Amplifier Specs are: 1. 50 X 4 Watts at 4 Ohm (RMS), 4 channals 2. Frequency response: 50Hz to 30 KHz 3. S/N Ration: >95dB 4. Bult in cross over filter: High Pass: 40 Hz to 250 Hz Low Pass: 40 Hz to 250 Hz. Also do I need to build a separate cross over for the speakers as shown in "TEMPO" manual as I have crossover in my Amplifier. If this amplifier will not work then what should be the specificatons to run these speakers.