diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Multi-Way (http://www.diyaudio.com/forums/multi-way/)
-   -   Dynaudio Esotar T330D Datasheet - Where to find? (http://www.diyaudio.com/forums/multi-way/36188-dynaudio-esotar-t330d-datasheet-where-find.html)

HiFiNutNut 17th June 2004 04:58 AM

Dynaudio Esotar T330D Datasheet - Where to find?
 
Hi,

I did a lot of search on the WWW and have not found it.

If you have the driver spec (parameters, frequency response, etc) please send me one or post it here.

I bought a pair of speakers with this tweeter and need to redesign the crossover because it does not sound right. I can't do it without the spec.

Many thanks,

phase_accurate 17th June 2004 05:55 AM

Esotar T-330 D :

Qms: 0.33
Qes: 0.5
Qts: 0.2
fs: 750 Hz
BxL: 4.62 Tm
Sd: 7.7 cm^2
Mms: 0.45 g
lin x-max: 0.3 mm p-p
mech x-max: 3.2 mm p-p
Lvc @ 10 kHz: 70 uH
Re: 5.2 Ohm


If you need the rest also I can mail or fax the sheet.

Regards

Charles

kensetsu 18th June 2004 09:20 PM

Re: Dynaudio Esotar T330D Datasheet - Where to find?
 
Quote:

Originally posted by HiFiNutNut
Hi,

I did a lot of search on the WWW and have not found it.

If you have the driver spec (parameters, frequency response, etc) please send me one or post it here.

I bought a pair of speakers with this tweeter and need to redesign the crossover because it does not sound right. I can't do it without the spec.

Many thanks,


Quote:

Originally posted by phase_accurate
Esotar T-330 D :

Qms: 0.33
Qes: 0.5
Qts: 0.2
fs: 750 Hz
BxL: 4.62 Tm
Sd: 7.7 cm^2
Mms: 0.45 g
lin x-max: 0.3 mm p-p
mech x-max: 3.2 mm p-p
Lvc @ 10 kHz: 70 uH
Re: 5.2 Ohm


If you need the rest also I can mail or fax the sheet.

Regards

Charles



Hi,

Was this enough info or do you need more? If so, I have the manufactures info sheet with drawing, dimensions, etc.

Tax 2nd January 2007 11:51 PM

Esotar T330D Vs Esotec
 
Do any of you know whether I can swap a Dynaudio Esotar for an Esotec without having to play around with the existing crossover?

Thanks

David Gatti 3rd January 2007 06:45 AM

I have all the specs here :
http://www.gattiweb.com/dynaudio.html

David

Tax 6th January 2007 10:06 AM

Thx David
 
Thanks David,

Studio Au 6th August 2014 11:54 AM

The data sheet is rather pixelated, can anyone confirm if the last holes for mounting (outside ring) are at a diameter of 125mm with a hole size of 4.5mm.

So if I am drawing up my CAD software the centres of the 4.5mm holes will be on a ring of 125mm, but spaced 120* apart to form three on a circle.

Thanks in advance.

forr 6th August 2014 12:09 PM

Quote:

Originally Posted by Studio Au (Post 4014915)
The data sheet is rather pixelated, can anyone confirm if the last holes for mounting (outside ring) are at a diameter of 125mm with a hole size of 4.5mm.

So if I am drawing up my CAD software the centres of the 4.5mm holes will be on a ring of 125mm, but spaced 120* apart to form three on a circle.

Thanks in advance.

Hi,

Esotar T_330D :
3 holes dia 4.5 mm on a circle dia 125 mm
maximal out dia 140.1 mm
minimum baffle hole dia 110 mm


All times are GMT. The time now is 05:11 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2