Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

active crossover the hard way
active crossover the hard way
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 30th May 2004, 09:21 PM   #1
HenryK is offline HenryK  Finland
diyAudio Member
Join Date: May 2004
Location: Helsinki, Finland
Default active crossover the hard way

Hi all!

I'm new here, greetings from the land of the Midnight Sun and 100 000 lakes (Finland). As far as audio & electronics are concerned, I'm just a hobbyist (and not a very advanced one) so I guess my input is likely to be somewhat neolithic for a while...

Now I've got these odd drivers (woofer + mid/tweeter x 2) I once inherited from someone who was going to throw them away. I've been carrying them with me for more than 10 years literally across the world (we used to live in Japan back then) and I feel it would be a shame not to use them one day since you can tell they are of decent make. Pioneer but officially discontinued so the big P does not support this old line in any way. Nothing useful on the net either. My idea was to go active with these babies just to see how it works out - not an easy task though since I have no specs at all. My only clue here is a single original passive XO.

Question: is there any practical way of figuring out where the original XO point was (no matter how roughly) somehow measuring the passive crossover...? That alone would be a start. I've done some rudimentary listening tests comparing sounds produced by the passive XO setup with sounds created by a variety of electronic filter networks. The results were totally confusing. This can't be the best way to do this.

I don't have any fancy measuring equipment even though I could probably make a simple frequency meter etc. if need be and have it calibrated at the nearby uni.

Can anyone help?


  Reply With Quote


active crossover the hard wayHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
active crossover: fir vs iir netchris Everything Else 3 29th July 2008 09:14 AM
Passive crossover into active crossover hahfran Multi-Way 16 10th February 2008 06:16 PM
Active CrossOver Toast_Master Subwoofers 4 26th April 2006 07:39 AM
PA vs DIY active crossover paulspencer Multi-Way 46 27th November 2004 01:25 AM
XVR1 active crossover, discrete active stage promitheus Pass Labs 18 22nd July 2002 01:29 AM

New To Site? Need Help?

All times are GMT. The time now is 03:42 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio