Designing a Reference Speakers - 4 Way Active - Page 2 - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 6th June 2004, 04:48 AM   #11
mbon is offline mbon  France
diyAudio Member
 
Join Date: Jun 2004
Location: France
Quote:
Originally posted by Thunau
"Phase Alignment

I believe that the active, LR phase-linear XO will take care of the issues. Because I use active XO, I have avoided all the phase problems associated most passive XOs."

That is simply not true. Active crossover has the same phase characteristics as a passive one given the same transfer function. A Linkwitz/Reiley crossover is a Linkwitz/Reiley crossover regardless of wheter it is performed on line level or speaker level signals.

I agree that the DSP will not solve automatically all crossover complexity...What is method to get good phase and transient response ?
I was planning to feed the loudspeakers with the crossover frequency and to move phase until SPL is max, doing this for each frequency corner will give good result, no ? And what about transient response, it depend more of the box than crossover, no ? Can you explain please...
  Reply With Quote
Old 6th June 2004, 05:01 AM   #12
diyAudio Member
 
Join Date: Jul 2003
Location: Silicon Valley
50 kHz?
__________________
Davy Jones
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
designing a sub and fullrange box for several speakers... mulletdude Subwoofers 116 17th July 2009 04:31 AM
Designing single supply audio - what best way to get a clean reference ground? azone Power Supplies 1 15th April 2008 09:53 PM
Designing PA speakers nicksmurf Multi-Way 34 15th August 2004 11:02 PM
help with designing speakers Wagener Multi-Way 3 29th May 2004 07:13 PM
Building a reference active 3-way speaker for high SPL Ricren Multi-Way 45 13th March 2004 11:10 PM


New To Site? Need Help?

All times are GMT. The time now is 03:53 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2