Have been doing some modelling on both the Jaycar & Vifa dome mids (3") and it seems the xover to woofer integration is really tricky requiring higher order low-pass on the woofer.
http://www1.jaycar.com.au/productVi...Keyword1=&Keyword2=&pageNumber=&priceMin=&pri
ceMax=&SUBCATID=434
or
http://www.d-s-t.com/vifa/data/d75mx-31-08a.htm
Has anyone had success with them?
http://www1.jaycar.com.au/productVi...Keyword1=&Keyword2=&pageNumber=&priceMin=&pri
ceMax=&SUBCATID=434
or
http://www.d-s-t.com/vifa/data/d75mx-31-08a.htm
Has anyone had success with them?
I think the dome midrange could be used in the
center of a waveguide to overcome the baffle problem.
There is one thing to note though: The dome must
not be soft material or you will end up with distortion.
Soft domes are not suitable to waveguides.
Aluminium or titanium dome should work (I suppose).
I haven't tried a waveguide with a dome midrange yet,
but I suspect that it might work with no problem
(of course by assuming that there is also a similarly
sized and shaped waveguide for the tweeter driver).
center of a waveguide to overcome the baffle problem.
There is one thing to note though: The dome must
not be soft material or you will end up with distortion.
Soft domes are not suitable to waveguides.
Aluminium or titanium dome should work (I suppose).
I haven't tried a waveguide with a dome midrange yet,
but I suspect that it might work with no problem
(of course by assuming that there is also a similarly
sized and shaped waveguide for the tweeter driver).
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.