ISO This Buschorn, but for a 4" driver

[GrahamnDodder]

This is a second- (or third-?) generation Buschorn model, but for an FE83-sized (3") driver.

http://www.speaker-online.de/bauen/bhorn.htm

Has anyone seen this design adapted for a 4" driver, such as the FE103E, or a 108Sigma?

Thanks in advance,

GnD

[planet10]

It is somwhere as a link to a pdf... the site also has pic of it going together... i think i posted the link recently, but i'm asleep right now ... if you don't scare it up i'll see if i can find it again.

dave

[moving_electron]

Originally posted by planet10
It is somwhere as a link to a pdf... the site also has pic of it going together... i think i posted the link recently, but i'm asleep right now ... if you don't scare it up i'll see if i can find it again.

dave

Here is the page with the pdf.

http://www.geocities.com/northbirdte...hhorn_mkii.htm

[GrahamnDodder]

Yeah, I have seen many versions of that fold. If you look at the fold I posted, it is significantly different, with a more elegant fold and a much bigger flare in the back.

That is the animal I am looking for. Or if anyone ha built the 3" version with an FE83 or FE87, I'd love to know what it reaches in the bass.

Thanks,

GnD

[Scottmoose]

A bit after the event, but here's one I found with an enlarged compression chamber a while ago. I suspect it's still for the FE83, but it should be easy enough to enlarge
Best
Scott