|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
7th May 2004, 09:33 AM
|
#1 |
|
diyAudio Member
Join Date: Dec 2003
Location: jakarta
|
12m/4631g00
Hello,
need help for design passive crossover.the driver is scanspeak. midrange is from 12M/4631G00.tweeter from scanspeak 9900 and woofer from focal 6"utopia. I need advice for midrange 4631G00.this is 4 ohm driver in 2.4 ltr volume box.please advice from everybody have experience with this driver.focal and revelator tweeter is not difficult for get the linear frequency response but this driver need some correction maybe?please advice for how much slope need,cutting frequency and value for inductor,capacitor and resistor.Thank you. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2 ScanSpeak 12M/4631G00 4 1/2 Revelator Midranges" | Daytona50 | Swap Meet | 1 | 18th December 2008 06:51 PM |
| FS: Scanspeak Revelator 12M/4631G00 | Wanderer | Swap Meet | 4 | 14th January 2005 06:47 PM |
| Scan Speak 12M/4631G00 - any opinions? | Spherion | Multi-Way | 1 | 24th December 2002 11:08 AM |
| New To Site? | Need Help? |
| Page generated in 0.07261 seconds (66.75% PHP - 33.25% MySQL) with 10 queries |
