diyAudio (http://www.diyaudio.com/forums/index.php)
-   Multi-Way (http://www.diyaudio.com/forums/multi-way/)
-   -   Tuning Qes Qts Bl Mms (http://www.diyaudio.com/forums/multi-way/33501-tuning-qes-qts-bl-mms.html)

 P Zolt 4th May 2004 08:34 PM

Tuning Qes Qts Bl Mms

Qes=1/(ws*Cms*Res) and Cms=Vas/(rho0*c^2 *Sd^2) and Res=(Bl)^2 / Re
Bl=sqrt((rho0*c^2*Sd^2*Re)/(ws*Vas*Qes))
Qes=w0*Mms/((BL)^2/Re)=w0*Mms * Re/(BL)^2
Qts value is determined by Qes=ws*Mms/Res, where Res=(Bl)^2/Re
BL = f(Fs, Vas, Qes, Qms, Re, Sd)
Formula from the board. I have no idea how to use.

Using Unibox Software
+Qes = +Qts = -BL
+Re = -Spl
Can I assume +Mms = +Qes =+Qts =-Bl
A change in the voice coil Re does not effect Qts yet really drops Spl = not good.
If I raise Qes (driver Re at Fs) the Qts goes up to a very nice .38 = great
and SPL drops by 1 db, mostly in the midrange leaving the bass intact. Slight drop in BL.
A higher Qts of .38 is an ideal situation for this Pro driver. Can I do this ??

Power Applied 50W
Fs 38.2
Re 5.0 Ohm
Qms 7.73
Qes 0.32
Sd 858.0
Vas299.0L
Xmax 5.5mm

SPL at 1 W 1 m 99.1 db
SPL at 2.83 Vrms 1m 101.1 db
Qts 0.307
Effective Qts 0.307
Mms 60.03g
Cms 0.289mm/N
Rms 1.864 Kg/s
Bl 15.00Tm
Ref efficiency, n 5.007%
Applied voltage 15.81 Vrms
========================

Now with a change to Qes of .40

SPL at 1 W 1 m 98.1 db
SPL at 2.83 Vrms 1m 100.2 db
Qts 0.38
Effective Qts 0.38
Mms 60.03g
Cms 0.289mm/N
Rms 1.864 Kg/s
Bl 13.42Tm
Ref efficiency, n 4.006%
Applied voltage 15.81 Vrms

I will be adding Dammer Varnish to the cone area to change the sound and add mass.
Is this the trick for a higher Qts higher Qes lower Bl yet leaving the Voice coil Re as is ??
How many grams need to be added for a Qts of 38.
I can post a jpg of Parameters or SPL plot, just ask TIA

 markp 4th May 2004 08:42 PM

You will not be changing Re by coating the cone. You will be changing Mms, which will affect Qms and Qts.

 RobM 4th May 2004 08:59 PM

Quote:
 Originally posted by markp You will not be changing Re by coating the cone. You will be changing Mms, which will affect Qms and Qts.
Fs and Qes, too. Fs will go down, Qms, Qes, and Qts will go up.

 markp 4th May 2004 09:00 PM

Quote:
 Originally posted by RobM Fs and Qes, too. Fs will go down, Qms, Qes, and Qts will go up.
Yep....

 MethMan 20th April 2005 03:10 PM

what's happens with Cms and Bl? Stays the same? I Try to calculate added mass for spkr. I have no suitable software for it.

Now:
Qms=1,85
Qes= 0,44
Qts=0,36
Mms=65g
Cms=330e-6
Fs=35
Bl=13,3
Re=5,6

Qms=2,61
Qes=0,58
Qts=0,47
Mms=110g
Fs=26,4

I assumed the Bl and Cms stays same. Is it true?

OTOH I can see small (3%) difference in parametres (could be affected with changing Cms) in table in Dickanson's LDCookbook. Misfortunately the mentioned part is very brief. There is a reference to Tom Nouissiane (probably distorted name- sorry) article in Speaker Builder from 80's which isn't procurable for me.

 Ron E 20th April 2005 03:17 PM

CMS and BL are constants.

Vas is constant

 Ron E 21st April 2005 03:21 AM

Sorry, brain slip.
CMS and BL are constants.

Recalculate Qes and Qms with new Mmt and Fs2.

Vas is constant

 MethMan 21st April 2005 08:02 AM

Clear. Thanks.

 planet10 21st April 2005 10:00 AM

2 Attachment(s)
Quote:
 Originally posted by RobM Fs will go down/ Qts will go up.
a graphic example

dave

 MethMan 21st April 2005 12:56 PM

Btw. I've got advice that paint, with exception of say resin-based thin impegnacy of the cone just for light stiffening, is not so good solution of adding mass because of higher loading or even possible overloading loudspaker's joints. Right solution is to fasten interrupted-ring shaped ballast made of non-magnetic metal directly into the former.

All times are GMT. The time now is 04:18 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.